Electronics Forum | Fri Mar 24 12:16:37 EST 2006 | patrickbruneel
Darn Rob you're brilliant You just solved the dilemma of micro cracks and hot tear in lead free, just add a softer metal like.....and the joints won't crack. You wrote "BTW: Lead is far softer & dissolves far more easily than copper or tin, hence wh
Electronics Forum | Thu Jan 24 09:53:56 EST 2002 | davef
You didn�t tell us about your solder, wave temperature profile, or the distribution of the problem. So, let�s assume the solder is near eutectic and the problem is wide spread. Wolfgang makes good points. So, let's talk a different tact. When we
Electronics Forum | Thu Aug 01 12:55:41 EDT 2002 | johnw
we run the paste in both air and n2 depending on customer requirements again it run's fairly well in both. Some people say it's better sme say it doesn't make a bit of difference, I'm somewhere in between at the moment. I definately think there's imp
Electronics Forum | Thu Apr 18 23:56:27 EDT 2002 | Abelardo Rodriguez
I'm trying to get a better understanding of the cooking process of pcb's. The use of nitrogen in reflow and wave ovens. Seems to have a wide margin of acceptance as a standard gas to prevent oxidation of metals in the board. Has any one heard or us
Electronics Forum | Fri Mar 24 11:54:18 EST 2006 | Rob.
Hi Patrick, I'm patriotic to a point & that doesn't include supporting crap decisions, & those that have handled the ROHS & WEEE implementation have been beyond useless & should be locked in a lead lined room with Roman plumbing. Yes we need to r
Electronics Forum | Fri Apr 06 04:10:25 EDT 2001 | kensmoke
We recently had a multi block panal change at the vendor Now the production lines are producing solderability defects in great number. The makeup of the pcb is a type of fiber glass mask green in color and pads with no tinning just copper lands.
Electronics Forum | Tue Jun 11 22:06:06 EDT 2002 | scottxiao
I encounter the problem, it is easy for pad(copper) to drop off from the PCB, which is Ni/Au finish. so my question is whether there is any specification about the force between pad and laminate material, and does the PCB corpoartion test this parame
Electronics Forum | Fri Jul 24 23:20:11 EDT 2009 | umar
Hi Dave, Thanks on your feedback, May I know the how's the contributing of Moisture content of bare board and the Thickness of the copper plating in the PTH to the solder ball and solder splash during hand soldering process ?
Electronics Forum | Sat Jul 25 08:47:25 EDT 2009 | davef
Both "moisture content of bare board" and the "thickness of the copper plating in the PTH" are related to each other. As you heat the solder connection, moisture in the board boils and out-gasses through the solder connection. Plating with the proper
Electronics Forum | Thu Oct 17 05:16:44 EDT 2013 | vincentdesilva2003
Anyone can help me how many percentage of blowholes and pinholes if i do the followings: 1. Increase copper plating thickness more than 25 microns. 2. Pre Baking of PCB to remove gassing by drying out the PCB's
