Electronics Forum | Thu Jun 17 11:46:33 EDT 2004 | Claude_Couture
Please define "worst case for feeder sizes". Quantity? Arrangement? wasted feeder space?
Electronics Forum | Thu May 09 06:17:47 EDT 2013 | hedvig
Looking for a good selection of Assembleon CL type feeders need all common sizes.
Electronics Forum | Wed Apr 23 07:46:49 EDT 2003 | pbc1963
Bernard, The problem we have is when unloading the feeder several components may be lost due to the partial peel back of he cover tape. This area I am referencing just passed the point of the knife to the pick area. Also matching the correct feeder
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Tue Sep 28 15:54:43 EDT 1999 | J. Robotham
Can anyone tell me how a Panasoinc MV feeder and a MSH feeder compare in terms of component sizes and placment speeds? I was told that MV feeders can run on an MSH although they take up 2 slots. I'd appreciate the help. Regards, Jason Robotham
Electronics Forum | Wed May 22 10:27:33 EDT 2002 | stefwitt
Fiducial recognition on the Siemens machine works like the Mydata. Once you select this option, fiducials will be recognized when a new program is send. You can also select recognition as part of the feeder refill function mode. There is no automatic
Electronics Forum | Thu Sep 29 11:44:47 EDT 2005 | stepheniii
What kind of volume? I've done boards that I think were longer on a standalone mydata. The boards hung over the end of the table and we had to leave the feeder bank to the right of the table empty. But later we did the same boards on a panasonic. I"
Electronics Forum | Mon Apr 24 07:37:57 EDT 2006 | craig_83
We have the IQ system. The problem that I was having is that when I load one board to the other, I want to avoid the table top changeovers. So I figure if I can make certain tabletops to run certain boards the changeovers would be much less. I though
Electronics Forum | Sat Dec 05 22:08:21 EST 2009 | casmt
MY9 - 19 are all the same machines. The frame is only bigger. With the 19 you can get up to 256, 8mm feeders if it has the stand table. Ocourse that is an advantatge it can handle large boards with a big table. I have used Mydata a many companys. A
Electronics Forum | Fri Dec 14 18:32:39 EST 2007 | kroberson
What machines have you worked with previously? Depending on the programming software used, CP6 can be relativly easy to program. CP6 has been a workhorse in the industry for a long time. One the process is set up, maintain the machines acording t
.gif)
