Electronics Forum | Tue Aug 23 09:52:51 EDT 2022 | jojoled
Can anybody recomend exact model number of USB to floppy disk emulator, which works for sure on JUKI KE7xx series PnP machines? I have bought this one : https://www.gotekemulator.com/P_view.asp?pid=54 and have KE760 machine, but it doesnt work (tried
Electronics Forum | Thu Oct 20 20:21:31 EDT 2022 | smtusa
I looked into Fuji but heard some horror stories of $50k firmware upgrades to get older machines to work with latest software. ASM doesn't come off as small business friendly. Panasonic is a possibility, I prefer platforms that don't force you to p
Electronics Forum | Thu Jul 17 10:09:06 EDT 2008 | dfhoadle
Were dealing with firmware issues for the stepper > motor, as well as communications problems with > the software. Vitronics is looking into it... > again, but even they seemed to be stumped. You > may want to ask your rep about it. Our machine i
Electronics Forum | Wed Jun 10 17:30:44 EDT 1998 | FAC
When creating part data�s for BGA or QFP style components, the line scan camera will be utilized (Camera No. 4). Using a Single nozzle type placing head, a nozzle capable of sufficient vacuum, and front lighting the part can achieve placement of a 74
Electronics Forum | Mon Apr 26 22:53:30 EDT 1999 | Dean
| Recently, we have been having problems with PLCC's passing vision on our IP's If the part is set up to be placed on Head 2, it will not always pass vision. However, if we move it over to Head 1, it will pass and place just fine. Now, I do realiz
Electronics Forum | Thu Mar 07 09:03:03 EST 2002 | cabjerk
After the IP3 is stopped by any means ie. Estop, cycle stop, or machine runs out of parts, upon restart the table will go to load position, unclamp, reclamp, read the fids and then proceed as normal. The problem is that if we already have fine pitch
Electronics Forum | Fri Oct 03 08:58:22 EDT 2003 | SMT Process
Folks, I use both UP1500 and AccuFlex. The basis for this machine was bought from SMTech several years ago as the SMTech 500. They sold off the last few SMTech machines with the MPM name on them (stupid move because they sucked), but then quickly r
Electronics Forum | Thu Nov 11 09:49:20 EST 2004 | cyber_wolf
In the last 6 months or so we all of a sudden started having a placing problem on PLCC28 components. We are stumped, and Fuji is stumped. Has anyone ever seen this before ? (This is on a CP43) Here is what we have tried and verified: �� Nozzle def
Electronics Forum | Thu Nov 17 17:44:19 EST 2011 | bobpan
Tim, 1. You dont need the vacuum verify if the quadalign is working properly. If you have the part quad-aligned and dont have alignment type at 0 it will never 'not' place a part. More or less...the vac verify was needed for the chucking machine (3c)
Electronics Forum | Thu Nov 29 00:38:57 EST 2012 | iqvisionmachine
About iQVision Incorporated in July 2011, iQVision’s mission is to provide reliable, robust vision-inspection solutions to Australian manufacturing industries, by establishing, then automating, objective quality processes. iQVision is a Matthews-af
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
