Electronics Forum | Sun Apr 02 05:21:26 EDT 2023 | dilogic
That was my first guess. But then I shuffled placement order, but machine always stops at the first part of the first task, regardless of what part it is. Like it wants to image it with P2P camera (which is absent) and ignoring the fact that there's
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Tue Sep 25 12:49:58 EDT 2001 | Hussman
Been there - done that. Makes a mess on that 2nd reflow process- doesn't it!?!?!? This is caused by design. If the open via is located in the land area, it will flow thru the via and cause pumps on the opposite side. You can have your vias filled
Electronics Forum | Thu Jul 14 15:24:55 EDT 2005 | valuems
Thanks pr I know what you mean, and just to let you know, you can turn the over head one off and get one for the center nest. Will be more than glad to tell you how to turn off and turn the center nest one on. And just to tell every one else, were
Electronics Forum | Thu Nov 24 21:19:40 EST 2005 | smartasp
Hi, We are also a hig mix low volum plant situated in Sri Lanka and just installed 2 Opals inline from Assembleon with the feeder exchange carts for faster change over. This machines can be upgraded to Topaz by just installing 4 more heads. So far
Electronics Forum | Mon Oct 09 18:40:43 EDT 2006 | darby
Seeing you are already using Quad; I'd look at a Samsung CP-45V. I believe your feeders will be compatible but please cheeck to make sure! These are a six head, on the fly machine that will do just about anything you want apart from gripper applicat
Electronics Forum | Thu Sep 17 11:19:57 EDT 2009 | jdumont
Does anyone have a reference to a spec for this? We have a tall SMT IC that we coat with AR coating in a Asymtek spray coating machine. We do not have the angle head option to spray from a 45 so the sides of tall parts are sometimes left uncovered.
Electronics Forum | Fri Feb 21 10:50:00 EST 2020 | tomdegas
I am getting the following error on our MY9 during hardware initialization: F-MOT-MSEDYN HYDRA Z/156 Motor Timeout After the Theta test, The HYDRA head moves slowly all the way to the bottom and then moves slowly back up and the system fails initia
Electronics Forum | Wed Mar 04 13:45:01 EST 2020 | tomdegas
I appreciate the help. The Hydra travel is fine and goes down and back up with no trouble. I swapped the Z Mot board with the Y Mot board with no change. The long ribbon cables were changed about a month ago but I will inspect them again to be sure.
Electronics Forum | Thu May 11 07:19:36 EDT 2023 | richardcargill
There's a chance the vision system is seeing part of head 1 as it looks at the component. We get that with older nozzles on Philips equipment ( the black coating has worn to a silver shine ) and the component camera sees the nozzle tip, which annoyin
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411