Electronics Forum | Thu May 12 12:59:54 EDT 2022 | spoiltforchoice
The most annoying thing about these boxes I have encountered is that nobody seems to want to keep using the same box and the same hook for more than about 5mins, some are easy to open, some make it easy to drop the setncil straight of the bottom and
Electronics Forum | Tue Jun 14 16:23:22 EDT 2022 | glasscake
Cant put a finger on it being an encoder that was just a single possibility. You can always hook up a scope to the encoder and see if they are working appropriately. I would look through the machine's utilities and see if there is some debug or more
Electronics Forum | Tue Jun 27 20:24:56 EDT 2023 | auriga2001
If you're lucky, it's just a bad boot sector. You can take the drive out, hook it up to another computer and copy it before trying to fix anything. Then try to reinstall programs if you have them. If you're unlucky the hard drive died. You might be a
Electronics Forum | Sun Dec 03 20:49:40 EST 2000 | Kel
The point is to charge the battery during the day, then completelty drain it at night by use of a light sensor.. I thought that due to the low current of the solar panel it wouldnt be a problem if i used a 6 Volt battery.. do i hook + to - or + to
Electronics Forum | Mon Jul 17 16:51:20 EDT 2000 | JAX
Michael, You nailed it, then again..... confusion is bliss. Oh Dave, Next time you have comments about how long your threads are just let them know: � Big Ideas are so hard to recognize, so fragile, so easy to kill. Don�t forget that,
Electronics Forum | Thu Nov 04 13:53:12 EST 1999 | Clifford Peaslee
Eric, You can connect NT systems together with little problem, using ethernet network cards with twisted pair cables and a hub. The only expense is the NT operating systems. NT also has a personal web server, so you can have your own Intranet. For y
Electronics Forum | Fri May 07 12:25:44 EDT 1999 | Clifford Peaslee
We have identified the problem with the network. The network we are hooked into, is currently shared with other web servers, and one of those servers had a renegade MP3 site which drained the network's resources. That server was shut down, and proces
Electronics Forum | Fri Jul 05 23:51:34 EDT 2002 | fastek
Sold a customer a Conceptronics HVA-70 Convection Reflow Oven recently. While performing the install I asked if compressed air was hooked up. Seems this customer ...who already had a HVA-70 convection reflow oven never used air or nitrogen with that
Electronics Forum | Wed Aug 14 11:55:31 EDT 2002 | ksfacinelli
One thing we did for our oven is hook it up to the compressed air system in the factory and bled in a small volume of air to create a positive pressure in the oven. The air is clean (non-oiled) and comes off the dryer. We can attain 5% RH. Remembe
Electronics Forum | Thu Jan 23 17:23:24 EST 2003 | slthomas
I have used Balston (www.parker.com/balston) for desiccator cabinets in the past and really liked them. It's the only brand I've used so can't comment on how they compare with anything else, but it was certainly easy to use (hook up 100psi and dial
.gif)
