Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Fri Apr 12 15:48:33 EDT 2002 | jersbo
SPC for each assembly(I use C(for board defects)NP(for unit defects) at the end of reflow to determine process capabilities determine Control limits. Once control limits are set, inspectors stop the process until out of control limit is addressed and
Electronics Forum | Tue Apr 09 21:40:26 EDT 2002 | ianchan
We are a local enterprise with limited resources, just like you described, so hope this experience sharing helps : we place a production Visual Mechanical Inspection (VMI) inspector at the end of each Reflow Oven area, complete with magnify scope 30
Electronics Forum | Fri Feb 12 11:45:14 EST 2010 | ppcbs
Greetings, > > We are looking to purchase > equipment to rework / repair our circuit boards > with BGAs. Our newer boards are starting to have > more and more BGAs. > > Is there any information > that "ranks" BGA rework stations? - a kind of a
Electronics Forum | Thu Apr 27 21:20:38 EDT 2000 | Dean
Here are some pointers to use during your X-ray inspection. Microcracking is virtually impossible to determine with X-ray. However, I suspect you are looking for "hard" opens. Those are much easier to find visually. If using a paste-and-place pro
Electronics Forum | Fri Oct 30 19:47:46 EDT 2009 | bigdaddysoy9
I programmed Orbotech VT-8000 and VT-9300 for around 5 years also. We have been using VI Technology Vi3k3 machines for the past 2 years. I find them to be far superior to the Orbotech machines in every way. To be fair, the Orbotech models we used wer
Electronics Forum | Wed Mar 14 17:11:57 EST 2001 | davef
First, x-ray inspection machines have a wide range of capilities. Resolution is a key measure of a machine's ability to "distinguish" features. People say that some x-ray inspection machines have the ability to position the board being inspected at
Electronics Forum | Thu Nov 19 14:38:49 EST 2009 | doremi
Oh, my dear, printer is just a part of the full picture. Without good and stable pick and place what if the printer is excellent???It is all important - printer, solder paste,stencil,P&P,oven,AOI and of course good process engineers or whatsoever are
Electronics Forum | Wed Jun 11 11:33:07 EDT 2003 | tt
We have been looking around at all of the various BGA visual inspection systems, (i.e. ERSAscopes like contraptions). It seems like the number of different manufacturer's of these types of systems has exploded in the past couple of years, and it lo
Electronics Forum | Sat Nov 23 08:05:20 EST 2013 | emeto
Hi, I would check the thing in the following order. 1. Check paste - SPI is the best way. If you don't get the right deposit there is no wonder you have issues. 2. Check reflow profile - tweak it to the point of perfection for the board you have. 3
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936