Electronics Forum | Tue Jun 29 13:56:27 EDT 2004 | Pierre
Where to find detailed information on fluxes? No one seems to know the real difference between Rosin fluxes with colophan, Resin fluxes or synthetic Resin fluxes, No Clean, Low Residues, VOC-Free, Halide-Free, Water Washable with alcohol base, Resin-
Electronics Forum | Thu Mar 31 23:14:18 EST 2005 | Steve
Russ if your asking me if covering the surface of the granite defeats the purpose then I'm lost. An ionizer is a very good suggestion but they are not inexpensive. If the table is grounded and the metal bars are on a grounded mat, laminate etc. then
Electronics Forum | Fri Mar 03 13:51:17 EST 2006 | Chunks
We've looked at our stencil under magnification after hand cleaning. There is some paste left behind. Machine washing removes all of the paste. Your best bet is to clean like normal, then look at the aps under magnification. Adjust accordingly (a
Electronics Forum | Tue Jun 05 13:23:27 EDT 2001 | kerryn
We are a high-mix/low-volume operation and end up cleaning 40 - 50 stencils per day. Does anybody know of an automated inspection system or "scanner" that can check a stencil for cleanliness?
Electronics Forum | Tue Jun 05 16:40:46 EDT 2001 | kerryn
Thanks Phil. However, my objective is to identify stencils that are not 100% clean prior to sending to inventory. I want to catch it before the solder paste has a chance to dry and harden in the apertures. Kerry
Electronics Forum | Mon Jul 12 11:35:27 EDT 2004 | Pierre RICHARD
Here are some answers to my questions after a good research. I also added more definitions that could help understand this esoteric language used in assembly, specially surrounding fluxes and their use. In blue italics are comments and extracts from
Electronics Forum | Wed Mar 30 10:08:15 EST 2005 | steve
Granite is a porous material and if anyone decided to clean this material you probably have an insulative barrier thus you would never have static dissipation. Spend $45.00 and put a mat over the granite or spend $80.00 and get an esd laminate materi
Electronics Forum | Wed May 10 00:46:32 EDT 2006 | Chris
I agree! I am using a SAC305 no clean from Alpha. I have noticed that even hand probing with volt meter leads requires me to press very hard on the pads to bust through the flux residue.
Electronics Forum | Tue Dec 19 10:08:10 EST 2006 | George
Grant, Why don't you try a water-base flux which is No-clean, VOC-free also? I have tried the 270WR flux from AIM with good results even on lead-free process. My $0.02, George
Electronics Forum | Mon May 07 22:29:52 EDT 2001 | davef
4 wire per sec ... you figure how many you need] Encapsulation ~$120K for a dispenser [10 sec per die ... you figure how many you need] plus a cure oven ~$100k Throw in a another ~$100k for marking and cleaning Check the September 2000 SMTnet New