Electronics Forum | Thu Mar 14 10:49:44 EDT 2013 | babe7362000
Have others seen a higher rate of machine downtime due to the cover tape on parts not pulling back properly. We have the same problem on the Jukis and Quads. About every 3 minutes the machine stops and the operator has to pull the tape back. And in
Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S
The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Thu Apr 29 01:55:27 EDT 2004 | Frank
Contact your manufacturer of the machine and see if the belt feeders are available. Comtra Systems is the maker of the belt feeders and I do not know if they sell direct to the end-user. I don't have any contact information for them. I know they
Electronics Forum | Thu Nov 19 08:29:42 EST 2009 | jdumont
We have had a 421 for a little over a year now and after the initial software bugs (we were one of the first users in the US i think) the machine is excellent! I would definitely recommend it. FWIW I was also looking at Juki but the feeder capacit
Electronics Forum | Mon Feb 11 11:28:43 EST 2013 | marcelorotofrance
yes, Bob, I agree about that. But I can't afford them by now. But the problem is that I had to reject almost the 50% of the feeders that came with the machine, because are useless even for 1206. I also work with a very old but faithfull Juki, with it
Electronics Forum | Thu May 05 07:58:35 EDT 2016 | cyber_wolf
Not sure what you mean. 0201's and 0402's are both on 8mm feeders. Juki's will do simultaneous picks an all 8mm feeders no matter the component size. Your feeders need to be maintenanced and calibrated to reliably pick 0402's and 0201's. I hav
Electronics Forum | Fri Jul 29 11:31:44 EDT 2022 | jojoled
Hi Guys, I have Juki PnP machine with 2 heads, and for some reason, whatever I do, I can not make the machine to use 2independent feeders for parallel picking up single component reference by both heads from 2 feeders. Example , imagine you have a
Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto
GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp
Electronics Forum | Tue May 26 07:07:50 EDT 2009 | cyber_wolf
Grant, The Fuji's looked good. However, the pricing and warranty is not competitive for their comparable machine. In addition, we are not a big fan of Fuji coming out with new feeder designs that are not backwards compatible. The first generation of
