Electronics Forum | Mon Jul 08 09:48:53 EDT 2002 | pjc
Stephen, Thanks for your reply. We'll give N2 a try in our lab oven and report here on the results.
Electronics Forum | Fri Nov 01 11:37:07 EST 2002 | Pete C
This is a technical forum. Equipment "needs" should be posted on the Equipment Mart- see in buttons on the left.
Electronics Forum | Mon Jul 07 23:17:34 EDT 2003 | MA/NY DDave
Hi After reading the dialog I think you should send this to a lab that can do cross sections a little etching and raise the magnification. YiEngr, MA/NY DDave
Electronics Forum | Wed Nov 10 17:45:35 EST 2004 | Dreamsniper
Hi, What's the acceptable criteria for Ion Chromatography Testing? I found a test lab but they said we have to define what is pass or failed. Can anyone guide me to the right document either IPC or MIL Std? thanks,
Electronics Forum | Tue Oct 25 14:33:13 EDT 2005 | travelinman
I dont know if you found anyone to do your inspection and sorting in China but I am the owner of Strategic Manufacturing Solutions LLC and we do contract manufacturing and have an indepentant inspection lab in Shanghai. We could be reach at 847.359.
Electronics Forum | Mon Nov 22 05:22:29 EST 2004 | Rob
Hi Harry, We had some of the ECU's, but all they are is a heater & a chiller, and the controller turns on whichever one is required. Unfortunately the contollers were pants so our lab made their own. Rob.
Electronics Forum | Tue Jun 14 12:22:05 EDT 2005 | Rob
Hi, Thanks for that, I know a bit about Mydata's but I was looking for something a little smaller - it's for our design lab. Cheers, Rob.
Electronics Forum | Tue Sep 20 05:56:51 EDT 2005 | Alen
Hello. I am interested in Dynapert Mps 2500. My email is alen.ebner@intro-lab.si Best regards.
Electronics Forum | Wed Jul 06 20:40:40 EDT 2005 | davef
Voltage does not flow. Current flows as a result of a change in voltage. Current capacity of traces * Graph is IPC-2221 paragraph 6.2, Figure 6.4 * http://www.geocities.com/CapeCanaveral/Lab/9643/TraceWidth.htm
Electronics Forum | Fri Jul 22 07:37:32 EDT 2005 | David Robbie
Hi, I am an engineer based in Scotland, but have some IC's sitting with a company in the Boston area, that need checked for coplanarity. Does anybody know of a company/ lab with a lead inspection machine that they could be sent to? Regards, Dave.
