Electronics Forum | Tue Oct 21 04:45:13 EDT 2008 | stanyserrao
Head 1 is not placing the parts in production. Same component is placed by head 2. Head 1 camera is camera 12 type and head 2 camera is type 8. Machine re-set done resent proper data and interchanged cameara still same problem was foundd in head 1.
Electronics Forum | Tue Oct 21 06:33:18 EDT 2008 | maheshbs
Dear stany, sry for wrong reply.
Electronics Forum | Wed Oct 22 13:39:38 EDT 2008 | evtimov
Did you check the lights? may be some leds burned there. Emil
Electronics Forum | Mon Jul 13 14:41:23 EDT 2009 | snsmt
most of the problems tend to be with TANT components and a few 0603 chips.
Electronics Forum | Tue Jul 14 14:42:30 EDT 2009 | snsmt
The Tant size is 3528-21. I use type 72 nozzle for it.
Electronics Forum | Fri Jul 10 18:15:33 EDT 2009 | snsmt
Hello everyone, i have a few questions regarding dropped components. I have a Philips Topaz X and it has been dropping components. I would like to know what causes them to drop. I know parts can be mispicked from time to time. This is very genera
Electronics Forum | Mon Jul 13 06:30:59 EDT 2009 | hcarrasco
1.- Check your vacuum a.- Check filters b.- Check air flow (the vacuum is generated by a Ventury using air flow, not air pressure) c.- Vaccum vias (Possible linth inside the vacuum lines) 2.- Check the nozzle condition (Probably broken o
Electronics Forum | Fri Feb 15 15:50:55 EST 2002 | Bruce
The CP-642 simply requires a camera upgrade for 0201 parts. This is the same camera as is used on the CP-643. You should then get identical results
Electronics Forum | Tue Oct 21 22:42:50 EDT 2008 | fujiphil
What error displayed after the vision process? If all the parts processed at Head 1 did not pass the vision, try to adjust the scan speed of the camera1. kindly send the error code. Jep
Electronics Forum | Mon Jul 04 13:56:23 EDT 2022 | madisreivik
Actually its one part. I had an idea to test some completely different, pre-defined component which has been placed on that machine before. Do You suspect there is a diabolical shape parameter somewhere ? :)