Electronics Forum | Thu Jan 05 14:04:44 EST 2023 | unisoft
>> The Unisoft ProntoPLACE software ( https://www.unisoft-cim.com/pcbplace.php ) creates programs from CAD or Gerber or XY rotation and BOM files for setup of SMT Pick & Place, thru-hole, manusert & dispensing machines, and includes the basic feature
Electronics Forum | Tue Sep 16 11:42:35 EDT 2008 | slthomas
If support is a concern, don't forget that any support provided by equipment manufacturers will most likely (certainly with Juki and Universal) require registration of the machines at a cost to you of probably $2k-$5k per machine. Some used equipment
Electronics Forum | Fri Aug 17 10:49:13 EDT 2018 | gpascolla
Hello, I am new to this group, and the company I am working for has started a SMT department we have an older and used line of equipment. We have a EKRA E-1 screen printer and a Juki FM-740. None of this I know how to program,any help would be much a
Electronics Forum | Sun Aug 13 00:15:58 EDT 2017 | deanm
We manufacture low volume, high reliability assemblies (class 3) that are conformal coated. Up until now we have been cleaning after SMT, then after through hole, then immediately prior to coating with test, formal inspection, etc. between cleaning p
Electronics Forum | Wed Sep 17 13:00:25 EDT 2008 | mw_fl
For the most part there would not be a lot of change over. There are two primary boards at this time that would be run on the line that also use common components. At this point all but a couple of the pick and place machines we have looked at have t
Electronics Forum | Thu Sep 16 17:22:16 EDT 1999 | DaveJ
We have some SMT components with gold plated leads. They're actually LCC led packages. A good solder alloy to use would be Indium / Lead to reduce tin dissolution into the gold and avoid the resultant brittle intermetallic compound. However, a recomm
Electronics Forum | Wed Nov 07 02:41:58 EST 2001 | marshall_shuai
Dear Mr. Jeff, Our SMT room are using the DEK288 and MPM2030 Printers at the same time. We found the similar problem also as mentioned by MR.JOHNW. We analysis it was mainly caused by the PCB metal fixture used in DEK288. The PCB metal fixture is
Electronics Forum | Tue Jun 14 15:03:15 EDT 2005 | slthomas
In that the machine times out and waits for a feeder refill and doesn't just skip that part and leave the space empty, it's not a defect. I have found 500ppm *fairly* easily attained in SMT depending on the board mix and how you define (1) a defect,
Electronics Forum | Thu May 18 15:08:45 EDT 2006 | grantp
Hi, I guess if your innovative and out-of-the-box thinking is not appreciated by the group here, then perhaps it's time to consider it's actually just arrogant, and stupid thinking. Then I guess it would not be out-of-the-box to consider that your w
Electronics Forum | Tue Mar 13 00:02:45 EDT 2007 | grantp
Hi, That's great, and there are better ways to advertise, such as banner adds, and trade shows etc. You also have no idea who I am and cannot just blow be off as someone young, as you did, so you can understand why that's annoying. Good luck with
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694