Electronics Forum | Wed Oct 28 15:34:45 EST 1998 | carlm
| Can anyone supply me with info on determining the volume of paste left on a pad once reflowed compared to the intial amount put down? Is there a formula or something? | That information should be contained in the technical data sheets supplied by
Electronics Forum | Thu Jul 05 17:10:29 EDT 2007 | arun2382
Thanks all! I'm facing this issue with one specific batch of QFNs. It could be a plating issue. But, nothing was evident from visual inspection,No sign of voiding or non-wetting. Cross-section images of solder joints were clean as well. Could this s
Electronics Forum | Thu Mar 30 08:48:37 EST 2006 | russ
So you have solder balls at the outer edge of the part right where the pad goes underneath? If so you just have too much solder but I wouldn't worry about them. the solder usually does not wet to the edges of these parts because of the exposed copp
Electronics Forum | Fri Jun 24 09:32:53 EDT 2011 | kahrpr
Looking at the appearance of pads and solder joint is pretty subjective. Especially lead free people are all over the map on the physical appearance of pads and joints. The true test is solderabilty testing, weather it’s just looking for good wetti
Electronics Forum | Thu Sep 30 12:02:20 EDT 1999 | Wolfgang Busko
| I am having problems processing immersion gold boards. The achieved solder joints appear acceptable a la IPC-A-610, but the resultant joint does not fully cover the land, i.e. you can still see an outline of gold pad. | What is the best way to achi
Electronics Forum | Mon Jul 06 17:42:49 EDT 1998 | Bruce Houghton
| I'm having a problem getting good reflow on gold sufaced boards. The profile looks good and I have adjusted it both hotter and colder and adjusted the various times ( soak, reflow ) to no avail. What realy gets me Is that a month ago we built some
Electronics Forum | Wed Sep 07 00:47:53 EDT 2011 | woodsmt
PCB, What is telling you that you have cold solder? You do not give much info. My QA/QC love this term to describe a multiple of issues. They are usally very wrong. If this is a reflow process and it just affects one part? An SSOP is not likley t
Electronics Forum | Thu Sep 30 13:37:08 EDT 1999 | Dave F
| | I am having problems processing immersion gold boards. The achieved solder joints appear acceptable a la IPC-A-610, but the resultant joint does not fully cover the land, i.e. you can still see an outline of gold pad. | | What is the best way to
Electronics Forum | Mon Jun 18 13:29:34 EDT 2001 | nifhail
What is the recommanded profile for board which consist of 0402 & 0201 comps. to reduce the effect of tomb-stone. Slow ramp rate ? how slow is considered as slow. Soak time 60 or 120 C,at which end should I stick to? what is the best time before reac
Electronics Forum | Tue Nov 27 20:05:31 EST 2007 | shy
Dback, Current method is by using dispenser machine to dispense the glue at PCB. This non-wetting is randomly and not repeating to the same location. My adhesive height is 0.01" to 0.035". Is this will cause the component to had a gap between the t
