Electronics Forum | Mon Dec 12 12:25:11 EST 2005 | John
I'm having problems feeding these to the pick and place. As the tape peels off the pocket the part sticks to the tape rather than remaining in the pocket. Machine is QUAD QSV. We've tried all generations of feeders we have available. Any advice is
Electronics Forum | Thu Jun 15 22:03:32 EDT 2006 | Frank
You are correct, the Hover Davis label feeder works on 'un-punched' flat carrier. Get a sample of your dots on the tape and send it to Hover Davis to see if their feeder will work for you. The Hover Davis feeder will peel the dot off of the tape so
Electronics Forum | Fri Aug 25 09:25:41 EDT 2006 | YQ Deng
For FR4 ENIG PCB: 1. In a normal condition, what is the broken location after BGA peeled off?(FR4 layer or Ni layer or solder ball) 2. What is the soldering acceptance criteria for BGA in CMK?
Electronics Forum | Thu Aug 31 16:06:26 EDT 2006 | GS
I rember time ago, the EIA-481 (1-2-3) and recntly may be EIA-200 ? sorry I anm not sure. Best Regards.........GS
Electronics Forum | Mon Sep 11 11:58:20 EDT 2006 | pfifla1
yes, sounds more like you are having a peel force problem. suggest you look at buying a tester to make sure you are being supplied quality reels, as said above.
Electronics Forum | Tue Oct 10 16:27:21 EDT 2006 | slthomas
No but the owner of the last company I worked for used to think prying PLCCs off the board with a screwdriver (using an R0805 as a fulcrum and crushing it in the process) was a valid test. "Feels pretty weak...our intermittent failure must be a pro
Electronics Forum | Mon Oct 16 20:53:42 EDT 2006 | davef
Here's the paper that Rob referenced above: http://quanterion.com/RIAC/Library/Library.asp?ArgVal=45118-030 It could be that International Society for Hybrid Microelectronics [ISHM] is now International Microelectronics And Packaging Society [IMAPS
Electronics Forum | Wed Feb 21 15:27:41 EST 2007 | wavemasterlarry
we switched to a lead free peel mask and have no pronlems. Maybe you using a leaded version of mask?
Electronics Forum | Thu Feb 22 05:30:06 EST 2007 | lococost
nothing but... We've had peel-off melting after reflow, burn up and turn hard and brown, melt in the holes and then turn hard... All very hard to remove afterwards. We have yet to find a proper solution.
Electronics Forum | Fri Nov 09 08:18:25 EST 2007 | mulder0990
In regards to the Torque tester from Fuji that tests the peel back force, you can buy that directly from Fuji for $250.