Electronics Forum | Tue Feb 07 10:25:37 EST 2017 | ttheis
Thanks for the tip. I'm still getting familiar with the machine by reading the manuals as I have time. Was wondering what type of solvent you use to clean the dispensing mechanism parts? Or do you not clean anything and simply dispose of the syring p
Electronics Forum | Thu Nov 07 10:07:02 EST 2019 | charliedci
Requesting help from anyone with experience in reflowing Te Connect, PN 1565917-4, 200 pin connecter. Pic attached. Cannot get all 200 pins to wet, main suspect is slight PCB warping during reflow. Have adjusted reflow profile. A 2.75 inch long SMT c
Electronics Forum | Tue Dec 03 10:02:30 EST 2019 | dwl
This is a perfectly appropriate question for this forum. Looking at the pics, the solder joints look fine to me. can you circle the questionable joint? Maybe I'm just not seeing it. In general its fine to reflow a questionable solder joint to troub
Electronics Forum | Wed Nov 11 11:50:19 EST 2020 | paulanderson
An update. I managed to resolve the issue by wiring my own :) got a friend with a UK spec MY12 to take pics of the internal connections of theirs and then hard wired ours to match - worked perfectly. message me if you have a similar problem and I ca
Electronics Forum | Fri Feb 21 11:04:40 EST 2020 | slthomas
I have not used many camera/display scopes (have seen a few demos) but I've never seen one that gave me the same quality image as a binocular scope. I even take pics with my phone through the lens and they don't come out half bad, even after cropping
Electronics Forum | Tue Aug 04 14:29:14 EDT 2020 | dwl
Is the component an LGA or BGA? If its a BGA, it appears like the component is missing balls, if its an LGA, it appears like the solder isn't wetting to the component. What solder are you using? The wetting to the larger pads in the last pic seems
Electronics Forum | Thu Jul 01 13:21:54 EDT 2021 | tanderson
I'm trying to find clear tape (8mm, 12mm, 16mm widths) and clear plastic leads to use with opened reels of components. A former supervisor provided some but I don't know where he got them from. Any suggestions on a source for these? I attached a pic
Electronics Forum | Wed Jun 01 04:31:30 EDT 2022 | ttheis
This is a 0603 ceramic capacitor. Thanks for the tip; this helped us figure out the issue. We reduced lighting and saw an improvement but still had issues. Looking closer at the rejects (see pic#2 in original post) there were some shiny spots on the
Electronics Forum | Tue Jul 19 01:53:53 EDT 2022 | ttheis
We are in process of calibrating one of our GSM machines; we were able to successfully calibrate the front and rear ULC's but when we moved on to calibrate the head we get a spindle runout error midway through the routine (pic attached.) The spindles
Electronics Forum | Tue Apr 02 19:13:02 EDT 2024 | mistrthou
Nice. BTW, I found a pic online. https://www.flasonsmt.com/Uploads/6528ca4e9c5b7.jpg I'm surprised it doesnt have that stuff underneath the machine behind the large panels. Thats where we kept ours.
.gif)
