Electronics Forum | Thu Nov 11 11:14:03 EST 2004 | rlackey
I know it's a dumb question but have you tried swapping feeders or getting them all checked? (Possibly not indexing accurately). I only suggest this as the CP's are turret, and have to take the component where it is presented, with no adjustment,
Electronics Forum | Mon Nov 22 09:31:29 EST 2004 | cyber_wolf
We have tried the vision both ways. Leads/body. Same issue. FYI Ken : The parts were not hitting the feeder pan on the back of the machine. I know this sounds really weird, but it seems that when we generate a program from Flexa(as opposed to FujiC
Electronics Forum | Wed Jan 23 11:14:11 EST 2019 | assuredtech
Do you have a spare head? or have you tried swapping the head to a different module? Is it always the same component (element)? Inspect the component under a scope / perhaps a packaging / adhesive issue. If the component is staying on the nozzle what
Electronics Forum | Wed Jan 30 00:56:00 EST 2019 | kiransahu
Sounds to me that the issue may be with vacuum and part of it, after the segment is put there's a little measure of air that pushes the segment far from the spout in MYDATA we consider it a kiss in my office, have you watch that the air that "puffs"
Electronics Forum | Thu Nov 11 09:49:20 EST 2004 | cyber_wolf
In the last 6 months or so we all of a sudden started having a placing problem on PLCC28 components. We are stumped, and Fuji is stumped. Has anyone ever seen this before ? (This is on a CP43) Here is what we have tried and verified: �� Nozzle def
Electronics Forum | Mon Nov 15 07:04:05 EST 2004 | cyber_wolf
Hello all, and thanks for the responses. 1. I have changed feeders/ It's not the feeders 2. Parts are being pre-rotated 3. All other programs deleted out of machine 4. Ran parts on sticky tape/ same problem Ken : That is a very valid observation th
Electronics Forum | Tue Nov 23 15:59:51 EST 2004 | RCanten
I have seen some crazy placement problems that I just couldn't figure out in the past and several have come down to boards moving in the clamp. I would double check to make sure you are clamping secure enough and slow your table speed down and see if
Electronics Forum | Sat Sep 08 23:36:14 EDT 2012 | mtech88
Can anyone help me out this Fuji CP4 problem? I just move my machine to a new place, The feeding sensor error keep on poping up. but the mahine work on manual mode. When we switch to auto mode, it just to pick up the part and the machine stop on t
Electronics Forum | Thu Mar 20 07:58:12 EDT 2008 | cyber_wolf
#1Run a Fuji gold board and see if the problem persist. Is your board clamp slipping? Fid camera tight? etc.. To see if you have a Y axis positioning problem: 1.Put the machine in mecha check 2.Go into Y-axis 3.Place a dial indicator so that the st
Electronics Forum | Fri Sep 07 08:57:28 EDT 2001 | Hussman
Por, You talking wave solder or reflow solder? At wave, nitrogen is the way to go. Just like you stated, it does affect the surface tension. If you're reflowing, I wouldn't go nitrogen unless you have to. Improper stencil design is usually the c
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774