Electronics Forum | Fri Jul 19 13:33:25 EDT 2002 | gdstanton
Dave, fyi...we decided not to go with the interconnects. At least during development phase due to excessive NRE to support the effort. However, we may revisit this when we come to production phase. Gregster
Electronics Forum | Thu Sep 26 20:25:06 EDT 2002 | davef
When we DOE a board, we use the following independent print variables: * Print pressure * Print speed * Separation speed * Aperture orientation * Squeegee hardness
Electronics Forum | Sun Apr 13 17:03:42 EDT 2003 | MA/NY DDave
Hi AGAIN Shoot they didn't separate for one click linkage http://www.edtn.com http://www.techonline.com http://www.eet.com
Electronics Forum | Tue Apr 29 11:19:09 EDT 2003 | davef
Metallization failure. A defect such as voids, cracks, separations, depressions, notches or tunnels or any combination in the cross sectional reduction that is a basis for rejection.
Electronics Forum | Mon Jun 23 10:47:28 EDT 2003 | alavezos
There are several companies that offer portable DI water systems. They will need to know what quality DI water you need and the quantity of water required. You may want to contact Technical Devices or Separation Technologies. http://www.technicald
Electronics Forum | Fri Aug 01 12:35:54 EDT 2003 | blnorman
Kester recommends that we store our 1400 gm tubes on the tip. Our documentation is based on their recommendation. The Alpha past we used was stored horizontally, but that was because the flux readily separated from the metal.
Electronics Forum | Fri Aug 01 12:46:22 EDT 2003 | Dirk McCoy
Are there any AOI of X-ray image solutions for around $150K or less? We were looking at Photon Dynamics Combo machine, as well as interfacing X-ray with pattern rec., now up in the air. Separate systems will not work for our application. Appreciat
Electronics Forum | Tue Mar 02 11:45:30 EST 2004 | jpa
I will be purchasing a printer for our company. I'm considering a used printer with 2d post inspection. Is it worth putting money into the vision inspection or would we be better off buying a separate automatic optical inspection machine downline?
Electronics Forum | Mon Jul 26 16:46:40 EDT 2004 | Frank
Can you use one of those hot-dog rollers (cookers?) you see in the corner convenient stores to keep the paste tubes moving to eliminate the separation? Ya know, the cookers with the week old hot dogs on it that are all shrivelled up?
Electronics Forum | Tue Aug 10 15:19:09 EDT 2004 | davef
Hey Bob, turn DOWN the volume. Waint daff yano!!! On the surface of things, if you�ve been to a dozen board houses that have not been able to properly separate boards, we�d kinda be inclined to think it�s you and not them. [In your defense, we hav
