Electronics Forum | Thu Jul 28 18:12:47 EDT 2011 | asksmt
Hi, what kind of issues i could get if the i do not provide heal properly in my footprint ? In my current design 0603 resistor package footprint heal is missing by 3 mils each side Please help
Electronics Forum | Fri Feb 24 09:08:47 EST 2012 | esoderberg
Look at http://www.Zierick.com. P/N's 1179T or 6233-AAAA-140. These are SMT jumpers that we use in our products.
Electronics Forum | Mon Aug 06 16:47:41 EDT 2012 | duchoang
Can you give more info: - Hand-soldered? Placed by Pick&Place machine? What kind of SMT machine? - Oven re-flowed? Temperature? - Any physical impact?
Electronics Forum | Mon Nov 18 20:30:39 EST 2019 | alanyang
The chip resistors are placed on the edge of the board, but the board has no or enough waste tabs. When de-panelizing, the bits may contact and break them. You can use a smt carrier, or add waste tabs in your next assembly manufacturing.
Electronics Forum | Thu Feb 27 08:59:15 EST 2020 | spoiltforchoice
In both cases, it will depend on storage conditions, unless you do something horrible to them (or as previously mentioned, wash them) months & months. For boards we put through SMT and then stash for THT loading in smaller qty's I don't think we've e
Electronics Forum | Fri Sep 24 11:38:32 EDT 1999 | danielm
I am in the process of picking a new resistor network for one of our new board. Since we are new to SMT i would like to get some opinions on networks. Currently we use one molded gullwing type network on our boards with no problems. Other than space
Electronics Forum | Fri Sep 24 23:33:30 EDT 1999 | Earl Moon
| I am in the process of picking a new resistor network for one of our new board. Since we are new to SMT i would like to get some opinions on networks. Currently we use one molded gullwing type network on our boards with no problems. Other than spac
Electronics Forum | Sun Sep 26 14:09:24 EDT 1999 | jgodfrey
| | I am in the process of picking a new resistor network for one of our new board. Since we are new to SMT i would like to get some opinions on networks. Currently we use one molded gullwing type network on our boards with no problems. Other than sp
Electronics Forum | Sat Jun 30 06:02:46 EDT 2018 | ali_jayyad
Hi, I was wondering what is the difference between MP and NO at the end SMT part number. I tried to look into it but could not find anything promising. e.g I have a resistors with part numbers 0603-NO and 0603-MP and 0603-RES. What could be the diffe
Electronics Forum | Fri May 08 08:12:32 EDT 1998 | Steve Gregory
| I am running a board that is .062" thick and has components that over hang the edge of the board by .090". I have bottom side smt components (chip caps and resistors only) and use the turbulent wave to help solder the components. The problem I am
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694
