Electronics Forum | Tue Mar 25 17:08:51 EDT 2008 | Paul
Your customer forgot to apply solder paste to the PCB ?
Electronics Forum | Tue Mar 25 22:51:26 EDT 2008 | davef
This doesn't sound like a solderability issue. It sounds more like nonwetting.
Electronics Forum | Tue Mar 25 15:53:47 EDT 2008 | cyber_wolf
I am sure that you did a reflow profile.... right ?
Electronics Forum | Thu Jan 15 15:26:36 EST 2009 | wavemasterlarry
Almost made it a full year!
Electronics Forum | Tue Mar 25 12:08:53 EDT 2008 | ludee_circuits
My factory produces Printed Circuits Boards.Today, my customer says they encounter problem with solder ability issue. Some of the boards have difficulties during SMT solder flow. Could not stick to the pads and the components fell off. Those boards
Electronics Forum | Fri Nov 11 04:06:46 EST 2005 | arnold
we are manufacturer of molded type transformer. we have a trim and form process and its damage the pins of our units. the TIN insulation was being damage so we decide to immediately solder (wave soldering) the units to avoid oxidation. my question is
Electronics Forum | Fri Nov 11 04:35:06 EST 2005 | Rob
Hi Arnold, Some wave solder machines have a preheat function, that raises the board temperature before soldering. Some transformers use single use thermal fuses/TCO's inside, that trip at a set value (in a range approx. 70 degrees C to 180 degrees
Electronics Forum | Tue Mar 25 17:37:59 EDT 2008 | hussman
If the component "fell off" sounds like double sided reflow - which is most likely a profile issue. If the parts just don't solder, could be many variables. I've had supervisors accuse ovens for bad profiles cuase they had missing parts. Too bad
Electronics Forum | Wed Sep 26 11:17:38 EDT 2012 | garym4569
We have been having a solder paste reflow issue which results in the solder not wetting to the LED lead. The solder appears to create "puddles" on the pcb pad. I have attached AOI image for review. We have had the pads analyzed for contamination, w
Electronics Forum | Tue Sep 14 13:38:33 EDT 2010 | rayguide
There is problem with the alignment of BGA Balls. Check for any vibration. http://hubpages.com/hub/SMT-Reflow-Soldering-Equipment