Electronics Forum | Tue Jul 18 00:47:42 EDT 2006 | sant
Hi Few weeks back for the similar thread I was enquiring about the performance of benchtop AOI. I did see the Saki m/c.It seems to be a good m/c with different technology. I have not bought yet. Looking to have more feedback. Any opinion about Saki
Electronics Forum | Wed Sep 11 12:52:14 EDT 2002 | slthomas
We have found that using the SPC capability of the profiler's pc software helps us identify oven malfunctions sooner than we would normally find it. The ovens tend to compensate for dieing or dead blowers by cranking the heaters on for longer cycles
Electronics Forum | Wed Sep 11 07:23:07 EDT 2002 | johnw
peter, define what you class as SPC for these area's, or do you just mean looking at the PPM or DPM levels? John
Electronics Forum | Wed Mar 24 12:54:02 EDT 2010 | davef
Ignore the defect * Late 1990s to early 2000s => ICT * Early 2000s to mid-2000s => MDA * Mid-2000 on-ward => AOI
Electronics Forum | Mon Dec 17 11:55:08 EST 2007 | chef
I recently had the same problems, solder bridges on every thing I made, different customers boards, etc. I wave with no-clean flux. As I sorted out problems (pin holes, blow holes, splatter, etc.) I found a lot of variable factors. I changed flux,
Electronics Forum | Wed Jul 19 20:28:49 EDT 2006 | mrduckmann2000
We recently purchased a Mirtec AOI machine, it take a bit to program but overall we are pleased. The machine has a downward looking camera, we have had some issues with the machine not catching opens. When a IC has it's legs bent straight up off th
Electronics Forum | Wed Mar 09 12:34:19 EST 2005 | DasonC
You can use Cp and Cpk to find out your machine performance and accuracy. Some machine had it own software and kit. ie. Siemens. If you are using Fuji and you can visit the AD. on this web, TIMEKEY. Otherwise, you can use a high precision AOI with
Electronics Forum | Mon Jul 17 13:36:55 EDT 2006 | kjeffries
I appreciate your comments regarding the programmability of the Mirtec. What type of SMT machine do you use? How easy have you found it to transfer the SMT profiles to the Mirtec? How do you rate the Mirtec in handling top/bottom, multi-panel asse
Electronics Forum | Thu Mar 25 12:24:12 EDT 2010 | ssager
When testing components on a PCBA, try to validate coverage for presence, correct, orientation, live, and alignment. AOI is not really great at catching cold solder joints and damaged components, and from my experience an X-Ray is only as good as the
Electronics Forum | Fri Jan 07 12:26:02 EST 2011 | seshadri
Dear friends, I would like to have your comment on Vitech and Mirtec. We have used Vi - 5K Perform in our facility and we have been requested by our customer to have AOI with side angle camera for the automotive board inspection for a up coming proj
