Electronics Forum | Mon Oct 26 02:00:36 EDT 2020 | chucherry5076
https://www.jrpanel.com/R The heat generated by electronic equipment causes the internal temperature to rise rapidly. If the heat is not dissipated in time, the equipment will continue to heat up and the components will overheat and fail, resulting
Electronics Forum | Tue Nov 21 09:46:19 EST 2006 | jax
I assume you are talking about Sn62Pb36Ag2 solder. You should not see any added concerns when subjecting Sn62 to multiple reflow cycles as compared to Sn63. As compared to Sn63Pb37: Reduced leaching issues Increased Wetting due to lo
Electronics Forum | Mon May 24 17:17:21 EDT 1999 | JohnW
| | Can anyone steer me towards a supplier of heatsinks suitable for use on a PQFP 160. Before you shoot me down in flames, I know that I am not going to get much heat away from the die because of the plastic but the application is such that the boar
Electronics Forum | Tue Nov 04 12:45:54 EST 2008 | smt123
Hi Martin, Have you considered printing the flux with a stencil? Stencils can be used for printing more than just solder paste. Quite regularly people use stencils for printing thermal grease, fluxes, conductive epoxy and more. The thing I like
Electronics Forum | Tue Jan 05 18:19:40 EST 1999 | Dave F
| I'm looking for information on a company called AI Technologies. They make conductive adhesives and thermal management materials for attaching dice and heatsinks. Any feedback from users would be appreciated. Thanks, | | Chrys | Hey Chrys: I
Electronics Forum | Mon Nov 05 20:31:09 EST 2001 | davef
Most people do not intend to �solder� Type K thermocouples. They use solder to �attach� the thermocouple. Search the fine SMTnet Archives for a posting by Chrys Shea. 1 Common thermocouple types commonly used for thermal profiling are: * Type K �
Electronics Forum | Mon Jun 07 15:33:08 EDT 2010 | bderks
Hi, I'm working at a very small electronics assembly firm and we need to get a better thermal profile of our reflow and solder wave ovens. Our firm is part of a larger firm that was set up to help handicapped people find work in the Netherlands. Yo
Electronics Forum | Mon Aug 24 08:44:52 EDT 1998 | Justin Medernach
| | | Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | | | Must be resistant to solvents such as MEK and acetone. | | | Cure below 150C, with possible potential for rework of the conec
Electronics Forum | Tue Dec 01 14:44:04 EST 1998 | Terry Burnette
| Hi | I have been conducting my first reflow profiles. Most of the texts that I have read suggest soldering the thermocouples to a populated pcb. I am finding this very difficult. I have been using a high melting point (Sn5 / Pb95) solder and the
Electronics Forum | Wed May 07 09:31:28 EDT 2003 | davef
We use uV Dymax glue for thermocouple attach sometimes, but don't like the remainder [anal] and loosing attach, sometimes. Roger Saunders, President Saunders Technology, Inc; said: PRO: � These products are easier to use than high temperature solde