Electronics Forum | Fri Feb 11 08:15:35 EST 2005 | davef
It sounds like you already know the answer. Hand soldering is much more stressful to a board than mass soldering, because: * It is more localized and there is no preheat. * It is more difficult to control. [Different connections require different h
Electronics Forum | Mon Mar 31 11:10:43 EST 2003 | davef
First, most �thermal shock� recipes are not a reliability test. There is no relationship between the failures seem in these tests and in-use application. These tests show you the failures in these tests. That�s it!!! Second, accelerated life test
Electronics Forum | Mon Jul 19 21:25:28 EDT 2004 | davef
It seems like the flux is burning-up before the metal begins to flow on this slightly odd component. Alpha talks about alternate reflow recipes for WS609, as follows: * A straight ramp up profile is preferred for reflowing low to medium thermal mass
Electronics Forum | Mon Jun 20 10:59:18 EDT 2005 | Jason Fullerton
Extra cooling is better (Alpha recommends -3 to -7 degC/sec) for cosmetics. Less chance of s o called 'cooling lines' that look similar to 'cold' tin-lead joints. (Seems a bit steep to me - I worry about the risk of cracking ceramic caps.) Might be
Electronics Forum | Tue Jul 26 08:20:46 EDT 2005 | Bob R.
All you can do is try it. I did a literature search last year on causes of BGA voiding and came up with a pretty long list, sometimes contradictory. I also discussed it with several paste suppliers. What I came away with is that what aggravates voi
Electronics Forum | Thu Jun 22 12:40:40 EDT 2000 | Boca
Everybody's right! Two concerns are proper preheat for the flux and reduced thermal shock to surface mount components. The stupid er dumb thing is that these can be at odds with each other. The flux vendor usually specs topside temp before wave.
Electronics Forum | Sat Apr 14 00:04:21 EDT 2001 | zam_bri
I'm not a Wave soldering guy and my friend have asked me a question on what is the best preheat time and temperature for Wave soldering.They experiences only 10% flow up thru the PTH barrel. I've asked them to increase the temperatue to 120 Deg C. Cu
Electronics Forum | Fri Nov 05 21:41:46 EST 1999 | chartrain
Temperature vs time is what soldering is all about. The faster you run your conveyor, the more heat will have to come from the pot for a given assembly. Example: You heat the board to 200F top side through the preheaters. Eutectic 63/37 melts at 361.
Electronics Forum | Sun Apr 25 10:28:46 EDT 1999 | Joe Cameron
Hello all, Been doing some comparisons on joints made using the soldering iron versus reflowed solder paste (on a QFP package). The difference is quite significant: the joints made by the soldering iron are inconsistent and in many cases not filled
Electronics Forum | Thu Feb 04 16:08:05 EST 1999 | Ryan Jennens
| I realize it's been discussed many times before. I need to know your opinions, experience, and knowledge concerning "today's"/latest and best pallet designs, suppliers, and methods for using them more effectively. | | Thanks much, | | Earl Moon |