Electronics Forum | Tue Nov 29 14:55:17 EST 2011 | jlawson
N2 is a reflow process widener so to speak, for leaded reflow less of a impact, for LF more impact, and if using finer LF solder pastes T4,T5 and smaller paste deposits generally, it helps widen window for flux in paste in oxide protection during soa
Electronics Forum | Sat Jan 05 09:34:10 EST 2019 | unisoft
5 minutes to program your assembly machine with the Unisoft ProntoPLACE software — http://www.unisoft-cim.com/pcbplace.htm --- contact us now & we will show you using your data or ours Use either CAD, Gerber or XY and BOM Save time on NPI, faster
Electronics Forum | Fri Feb 20 13:01:26 EST 2004 | Jay
First, it depends on the alloy composition of the solder. As you might know, eutectic Sn/Pb solder has the lowest melting point among available conventional solder systems. (except those based on Sn-In and Sn-Bi systems.) For example, 63Sn/37Pb - 183
Electronics Forum | Mon Oct 23 06:50:06 EDT 2017 | spoiltforchoice
For package shapes/names I would recommend using manufacturer names. This is much safer than coming up with descriptive names like QFN32_5x5 as there are multiple 5mm 32Pin QFN shapes even when pitch is the same, this makes it safer to use a name in
Electronics Forum | Thu Apr 26 12:06:08 EDT 2007 | basem
$100K for this entire line. We are thinking of getting a Chinese made reflow oven that looks pretty good at $25K. Also, we need to deposit solder using a dispenser as stencil printing will be reserved only for higher volume boards. It will not be pra
Electronics Forum | Sat Jul 26 07:42:49 EDT 2008 | pcbbuilders
I am not very concerned about production time, but it is always a thought! Quality is more importnant of course. We have 2 different pastes, with almost identical requirements. We can get close to their profiles, but i am worried that i am spending
Electronics Forum | Wed Aug 19 05:00:56 EDT 1998 | Tom Blum
Hi there, I'm actually facing a lot of trouble with PCB's presenting up to 3mm of bow /twist at reception i.e. before assembly. The PCB size is 220 by 230mm. The boards are to be assembeled SMD double sides with 05.mm pitch on both sides. In order to
Electronics Forum | Mon Jul 15 09:41:11 EDT 2002 | soupatech
I am experimenting with 2 types, FG256 17x17mm and FG456 23x23mm both with a 1mm pitch and .5mm ball. They both have a full array. As for as the x-ray, we are looking into pruchasing some used equipment but will mostly send them out for testing until
Electronics Forum | Wed Jun 02 18:28:17 EDT 2004 | russ
I would look at the Samsung CP40 or 45. They have the placement rates you want even a little better on the 40. the 45 will double that easily. They handle all types of parts down to 0201 components. Depending on the camera you select (25mm) you ca
Electronics Forum | Mon Dec 17 12:06:58 EST 2007 | pjc
5 Steps to Eliminate Bridges: 1. Establish (wave) Parallelism First and foremost, you must establish board-to-wave parallelism. This is the prerequisite to any wave solder process control. For an understanding of the power of this approach go to ht