Electronics Forum: two passes (Page 8 of 22)

Machine AOI

Electronics Forum | Wed May 23 08:39:37 EDT 2012 | tony_d

Thomas, We evaluated several AOI machines and narrowed the field to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. In our experience, the MIRTEC machine simply outperformed the competitive

orientation of polarised smd components on reels/tapes

Electronics Forum | Mon Jul 25 09:11:25 EDT 2016 | spoiltforchoice

There 2 main rival standards for orientation in tape and because you can't really trust manufacturers to stick to one or the other or something else entirely it is always wise to check the datasheet. Typically an SOIC will have pin 1 the same end as

Re: PLCC's on IP3

Electronics Forum | Mon Apr 26 22:53:30 EDT 1999 | Dean

Recently, we have been having problems with PLCC's passing vision on our IP's If the part is set up to be placed on Head 2, it will not always pass vision. However, if we move it over to Head 1, it will pass and place just fine. Now, I do realiz

Yestech AOI question

Electronics Forum | Fri Oct 29 11:59:35 EDT 2010 | rway

We currently have two YTV-M1 inline-systems from YesTech. I have been using them for around 3 years now. They are descent machines. If you decide to go with YesTech, go for the F1 system. This will give you the ability to upgrade with side camera

MPM HiE E00900 Fault

Electronics Forum | Mon Jan 25 15:51:02 EST 2016 | aemery

SP1 is a bi-metal spring loaded switch or the "air fault" switch on the main air manifold that detects the presence of an appreciate amount of air being supplied to the machine. Air pressure overcomes the adjustable spring and closes the contacts.

Re: BGA repair/rework

Electronics Forum | Sat Mar 06 13:34:04 EST 1999 | Earl Moon

I'm having a fun time between BGA rework/repair using an SRT 1000 and SPC efforts (much easier) using DEK stencil printing processes and BTU reflow with 6 Fuji lines in between. Concerning the BGA stuff, I'm getting about 60% succes

Re: Just finished a VOC-FREE FLUX Evaluations

Electronics Forum | Thu Jan 14 15:10:14 EST 1999 | Earl Moon

Hi Folks. Has any Process Engineer here done a complete evaluation or controlled experiment for VOC-FREE Flux? Our goal here at CEBUKid, Inc. is to implement a VOC-FREE process. We have all the necessary (OPTIFLUX) spray equipment, and we're c

Yield on 0402 SMT Printed Circuit Board Assemblies

Electronics Forum | Fri Jan 05 12:17:31 EST 2007 | Cmiller

Our first pass yield across all our products is above 95% but we include anything that does not meet IPC standards. Probably 75% of our failures are not electrical. AOI is a great tool to get a consistent measure of your process. I dont know how anyo

Solder wave

Electronics Forum | Mon May 07 11:09:49 EDT 2007 | davef

4 Fluxer Operation 4.1 Set-Up and Check-Out the Fluxer 4.1.1 Spray Fluxer Set-Up and Check-Out Pass a sample unsoldered board through the machine. Remove the board just after passing through the fluxer and the air knife.

Soltec Parts - cheap?

Electronics Forum | Thu Feb 16 17:01:23 EST 2006 | darby

Never had anything to do with Soltec so I cannot comment on their service. However. You must realise that machine manufacturers/distributors incur a cost in storing spare parts and making them available for immediate delivery. They are not held on co

two passes searches for Companies, Equipment, Machines, Suppliers & Information

SMT & Test Auction From All Over The West (Best in the West)

Best Reflow Oven
2022 Eptac IPC Certification Training Schedule

World's Best Reflow Oven Customizable for Unique Applications
Industry 4.0 Reflow Oven

Orange Sticks, Wiring Aids & Probes for Soldering & Desoldering.
PCB Cleaning

Heller - Best value SMT Reflow Ovens in the market.