Electronics Forum | Thu Aug 21 14:39:50 EDT 2008 | johnhburris
We have been running a 2060 (along with a 2050) for about a year. Great machine; good follow up to the 700 series, of which we run several variants. We have a 2 shift, 5 day operation with 7 changeovers/shift. We've minimized downtime by building fee
Electronics Forum | Mon Feb 14 05:58:06 EST 2011 | vinitverma
Gabe, You now need to teach the Datum position for the front feederbar and for the rear feederbar too. If I'm not mistaken the datum position for the front feederbar is position no. 21. Just put a feeder on position no. 21 and use the camera to find
Electronics Forum | Thu Apr 26 15:57:08 EDT 2007 | grantp
Hi, I would get a second hand MYDATA, and that should do the trick. Lots of feeders available, and easy to program. Good for small volume, but not high volume.
Electronics Forum | Fri Sep 23 08:16:57 EDT 2005 | gregp
Base, You are absolutely correct. This is what I intend to do. In fact, our feeders at one time had reel hangers that would allow for reel removal and thus splicing. Sometimes it is frustrating when people are set in their ways and won't consider
Electronics Forum | Thu Jul 18 17:38:27 EDT 2019 | rgduval
Not swapping out feeders....swapping out magazines. It only works well if you have enough extra mags to load all the feeders on. And is a viable solution if your position limited on your machine. Before the advent of Aegis feeders for My machine
Electronics Forum | Thu May 28 21:13:09 EDT 1998 | skhun
| Our company is currently looking to implement a SMT production line. What I am looking for is feedback on people's experiences with various machines. | Here's what we are in the market for: | Low/Mid volume 3,000+cph machine that can handle high j
Electronics Forum | Fri Sep 23 10:25:40 EDT 2005 | gregp
On our machines, the feeder release latch is designed such that the feeder goes offline (machine will not pick from it) before you can actually remove the feeder. This makes it virtually impossible to damage a nozzle or spindle. I'm not sure about
Electronics Forum | Fri Jan 16 16:35:49 EST 2015 | rgduval
Evtimov, I would love to look at a more contemporary machine! Or, jobs that fit better on the machine that we have. However; a. we're a start up, and the GSM was here before I was; and b. we're a start up, in the EMS world, and sometimes, don't get
Electronics Forum | Fri May 23 12:18:59 EDT 2003 | vortex
First off is your CP4 0402 ready? Before we could begin placing 0402's we had to have a vision upgrade. Once you have that or are sure your machine can handle 0402 then you will have to get 8x2 feeders. There may be a way to rig an 8x4 feeder but i'm
Electronics Forum | Wed May 19 09:44:24 EDT 2004 | rlackey
Hello again Grant, In addition to our Fuji CPs we run Universal machines, and although they are pretty reliable, they are not in the same league. Regarding Fuji Placement speed we hit 30K plus on a couple of boards with no issues, but you do have t