Electronics Forum | Mon Feb 18 09:46:42 EST 2019 | cdav1100
We currently run a Yes Tech BX machine using the Yes Vision software on Windows 7. With Windows 7 support running out in January next year, I was curious if anyone had managed to run the Yes Vision software under Windows 10. The obvious answer is to
Electronics Forum | Tue Apr 09 16:25:28 EDT 2002 | clarkk
Alan, You're right, mass inspection after assembly won't work. The inspectors will miss 25% (or more) of the defects, and the boards will be reworked before SMT operators can properly define defects and their sources. The company I work for tends to
Electronics Forum | Fri Apr 02 10:26:13 EDT 2010 | fishingfool
Manjunath The top camera will be used for probably 90-95% of your inspection needs. However, without side cameras that 5-10% of uninspected parts can be a real pain to manually verify. What you need to figure out is what is your product to inspe
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
Electronics Forum | Fri Apr 20 14:11:27 EDT 2012 | rway
Programming is different, yes, but so is the terminology. ///with machine vision you have parameters that select what is good and what is bad, and you have parameters that help make bad look worse and good look better making the difference between w
Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Wed Jul 26 18:42:09 EDT 2017 | unisoft
hi john we have software that we been selling for over 30 years now that programs Pick&Place and AOI machines, etc. from Gerber only data, CAD data or XY rotation files and BOM files. Here are a couple of links: *** ProntoPLACE - Assembly machin
Electronics Forum | Fri Aug 04 10:09:47 EDT 2017 | ks0707
Good morning, I looked one cycle of programming of Koh Young 3D AOI machine first, and will do same thing for JUKI Pick & Place and Mechatronic 2D AOI machine soon. BTW, I found from User manual of Koh Young 3D AOI that it allowed Mento Export file
Electronics Forum | Tue Jul 25 14:16:06 EDT 2017 | ks0707
BTW, is there any parts package library which can be imported to JUKI Pick & Place machines ?
Electronics Forum | Tue Jul 25 14:33:41 EDT 2017 | ks0707
Thank you Evtimov.
