Electronics Forum | Sun Dec 03 20:49:40 EST 2000 | Kel
The point is to charge the battery during the day, then completelty drain it at night by use of a light sensor.. I thought that due to the low current of the solar panel it wouldnt be a problem if i used a 6 Volt battery.. do i hook + to - or + to
Electronics Forum | Tue Nov 09 21:20:28 EST 1999 | Gyver
Hello all, Recently, we had a bad problem of block protection. You know, our programmer can't protect the 29F002 flash ROM, and our motherboard doesn't have 12 volts output for BIOS. So, from the preceding phenomena, it seems impossible to get a prot
Electronics Forum | Tue Aug 03 14:41:52 EDT 1999 | Paul O.
We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized water o
Electronics Forum | Tue Aug 03 17:44:34 EDT 1999 | Earl Moon
| We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized water
Electronics Forum | Tue Aug 03 20:31:17 EDT 1999 | ScottM
| We're getting field failures in a high impedance portion of the circuit. Think the unpopulated pc card has contaminates because we were able to grow dendrites by applying a 9 volt battery across the suspected pad, placed a drop of de-ionized water
Electronics Forum | Wed Jul 14 12:03:53 EDT 1999 | greg c.
i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the s
Electronics Forum | Wed Jul 14 15:06:33 EDT 1999 | M Cox
| i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the
Electronics Forum | Thu Jul 15 15:37:04 EDT 1999 | David
| i have worked with the universal gsm in the past and am now helping out a contracting company who is setting up one in their facility. My question is: the power requirments for the machine calls for 3-phase 230V, does it really need 230V or is the
Electronics Forum | Wed Nov 14 00:38:45 EST 2001 | jarvis76
Does anyone have experience with the zsct1555 timer chip made by Zetex? I can't seem to get it to oscillate properly. My values for vcc and components are as follows: Vcc=1.5v Ra=220 ohm Rb=3200 ohm Ct=100uf OR..... If you know of any other chips
Electronics Forum | Wed Jun 25 18:04:49 EDT 2003 | MikeF
It looks like we'll have to go the conductive process tray route. I looked through web sites for Brick Container and several other esd suppliers and did not find anything that would work. I saw the tray you mentioned in my Techni-tool catalog, but wa
