Electronics Forum | Fri Oct 02 13:55:58 EDT 2020 | lesfarnacer
hi , need help please with my DEK Horizon 03i , we trying to programme a longboard 600mm on the printer and board lengh on our printer is limited to 510mm . I checked on the hardware eve thing is ok but in the software we don't have the longboard op
Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
Electronics Forum | Tue Mar 01 04:25:48 EST 2022 | shrikant_borkar
Dear Members Please help me to support to one of my client does not have co planarity in his SIPLACE D1i Pick and place machine. We would like to understand why this Lead lift up issue has passed thru pick and place.? Is there any method by keepin
Electronics Forum | Thu Apr 14 14:16:51 EDT 2022 | dsmith
Hello and good morning. I've recently encountered an issue with a DEK tool and no one is able to remedy it. During the initializing phase, the table begins "bouncing" up and down and never stops, halting the process. There's a pass through proximit
Electronics Forum | Mon Apr 18 12:14:39 EDT 2022 | proceng1
As far as hole fill, as was stated above, class 2 only requires 50% up-fill. In order to get better up-fill on the initial pass, you may need to consider more pre-heat. Also, better application of flux. Are you using a drop jet, or a spray? You
Electronics Forum | Wed Jul 06 15:26:12 EDT 2022 | glasscake
No experience with low temp solders for PIHR but we do use standard lead free 245-255 peak profiles on high temp connectors frequently. Honestly the added cost of the high temp connector pays for itself in labor. I almost always use oversized apertu
Electronics Forum | Tue Aug 23 13:44:46 EDT 2022 | jojoled
Can anybody recomend a (LED-safe) flux removing/cleaning liquid, which can be used in ultrasonic cleaner in immersive application? After using one product I have been told, that none of the top suppliers of chemicals have this kind of liquid (subject
Electronics Forum | Thu Sep 15 19:32:51 EDT 2022 | totech
I would like to Add that Mitch is very knowledgeable on this subject, I believe since 2008 this has been a topic of his .. different of low temp baking 40c 50c 60c vs 90c or 125c I do have some totech independent evaluation on the subject if you lik
Electronics Forum | Thu May 11 07:19:36 EDT 2023 | richardcargill
There's a chance the vision system is seeing part of head 1 as it looks at the component. We get that with older nozzles on Philips equipment ( the black coating has worn to a silver shine ) and the component camera sees the nozzle tip, which annoyin
Electronics Forum | Fri Oct 13 10:44:03 EDT 2023 | yannick_herzog
Hello, thank you for your responses. Some time has passed since then. Unfortunately, we have been facing the issue of incomplete filling in the production when it comes to large openings in the template. This phenomenon occurs in both directions. T
