Electronics Forum | Fri Apr 11 06:22:04 EDT 2008 | andrzej
Hi Andrzej, > > We are using for BGA (0.8 pitch) > square apertures size 0.4 mm (rounded corners r = > t) and stencil thickness t=5 mils. So area > ration-_ w/4t=0.8 > > Regards Jan Hello Jan, I understand that you have the same pad dimensio
Electronics Forum | Tue Sep 21 04:00:27 EDT 1999 | Wolfgang Busko
| My stencil thickness is 6 mil and we got qfp's with fine pitch. | how many percent should i reduce my stencil aperture using a 6 mil stencil for 0.5 mm pitch and 0.4 mm pitch ? | | thanks | We use 6 mil lasercut stencils with 15% reduction and th
Electronics Forum | Wed Feb 27 04:23:13 EST 2008 | fujillews
Hi It is best to fit the VGA camera for 0201 parts make sure your software is high enough..above v1.33 although you can place without but no so good. 0.4mm tapered nozzles are best. 0201 feeder the locator base in increased by aprox 0.3mm and the ind
Electronics Forum | Wed Jan 19 22:28:20 EST 2000 | Dave F
Taking things from a slightly different angle: Cost of assembling various packages based on volume: C/R placement: |$0.01 to 0.04 per part SOIC: | $0.03 PLCC based on lead count: | 20-39 $0.16 | 40-59 $0.18 | 60-79 $0.20 | 80-
Electronics Forum | Tue Dec 21 16:47:15 EST 1999 | GERARDIN
Hello Pascal As mentioned by Wolfgang the key issue is the printing process capability. For a thick copper level 90�m we noticed that the pad reduction can be greater than 20% depending on supplier sources. Typicaly for a cad Width = 0.4 we can
Electronics Forum | Mon Nov 15 15:31:54 EST 2004 | GP
We are looking for machine that can do the following: bonding of 0.5x0.5x0.8mm mm cramic part. - detect target surface position 1.5x0.8mm - dispance a drop of 0.8mm of epoxy adhesive on trget surface with position accuracy of +/-0.04mm. - pick the 0.
Electronics Forum | Fri Sep 04 13:49:30 EDT 2009 | xps
Hi, in our company, we had performed a failure analysis on some PCB finishing ENIG faulty, cause detachement of heavy components. So we performed a SEM / EDX analysis on the nickel and we discover a 20 % of carbon instead of the standard 0.04% (on s
Electronics Forum | Thu Apr 15 14:29:09 EDT 2004 | Debi
What are diffrerences between DEK 248 and MPM Microflex? We are thinking about off-line screen printer with vision and wiper. When i compare specification MPM has better accurancy 12,5um and DEK 248 25um so one point for MPM. MPM is a new constructio
Electronics Forum | Wed Sep 13 20:04:37 EDT 2006 | mika
Hi, We have a customer that want us to produce a single sided 0.4 x 100 x 50 mm size RoHS pcba approx 1000 of them. The board only contains three 2.54mm pitch Non P.I.P, SMT-connectors. We have never produced such a thin pcb:s before. We are thinkin
Electronics Forum | Wed Aug 24 21:57:45 EDT 2005 | adeline_ko
The blistering is around the plugging via. I can forward you the pic. For the plugging process, I'm not too sure how they plug. What is the correct practise for the plugging via. Now, what they did is. They will do a tenting process for both side.
