Electronics Forum | Thu Oct 02 21:00:26 EDT 2003 | davef
Who says the chlorine comes from your tap water? Our PTOW dumps boat loads of chlorine into our water periodically. Sometimes it's so bad you can smell it. We doubt that it is the source of your problem. This chlorine will volitize very quickly,
Electronics Forum | Wed Aug 24 16:30:11 EDT 2016 | shawn_halo_1
I have a 1oz Flex PCB (FPC) that has 2 0.4mm pitch connectors that need to be SMTd and 9 4.5x1.0mm pads that have conductive rubber contacts that are press fitted onto the FPC. The FPC has a one time bend radius of 15.5mm. Image is attached that show
Electronics Forum | Tue Oct 10 12:56:15 EDT 2000 | Ken Van ZIll
I agree that homplate is a good design, but also this could be caused by the stencil thickness and aperture size, if you are at 7-9 mils thick stencil and a 1:1 ratio on aperture size then 2 things i know of will happen, one a squishing out of past o
Electronics Forum | Thu Jan 04 08:33:08 EST 2007 | davef
You cannot determine foil thickness from its weight per area, because of the significant variation in the density of electrodeposited [ED] copper. But people don't care. They do it regardless. (oz/ft2)||(mils)||(mm) 1/2||0.7||17.8 1||1.4||35.6 2||2
Electronics Forum | Fri Sep 19 10:35:56 EDT 2008 | mi
No, I don't have Panapro at all. Some Mydata files I've exported end in: *.cmp & *.gen Files saved on floppy from Panasonic MSH II end in: *.MNG, *.POS, *.SET Panasonic program filenames come out as: CF000000.POS CF000001.POS ... Sample quote of
Electronics Forum | Thu Jul 15 21:10:53 EDT 1999 | Scott McKee
| I was wondering if someone could help me with a little problem I am Having with a MyData TP-11 UFP running TPSys 1.4.2. Early this week the machine crashed and I had to reload the software. I re-insatalled Venix then the CP4 driver then TPsys and S
Electronics Forum | Fri Jul 16 05:48:06 EDT 1999 | Wayne Sanita
Give Mydata a call as Scott said, they will take step by step over the phone. Wayne | | I was wondering if someone could help me with a little problem I am Having with a MyData TP-11 UFP running TPSys 1.4.2. Early this week the machine crashed an
Electronics Forum | Tue Feb 23 09:51:35 EST 1999 | Steve Schrader
| Hey all- | | My question is this: My stencil printer operator has said that he has to | wipe our 6-mil stencil each pass to get the paste in the 20-mill pitch | aperatures for a QFP to release well. We are using Amtech NC-559 type 3 | paste with
Electronics Forum | Thu Jul 18 11:57:19 EDT 2002 | pjc
For component loss that cannot be accounted for by the placement machine's computer I would have the operators collect all loose components from the feeder setup area and in and around the placement machines after each product batch run. This is cert
Electronics Forum | Mon May 17 02:06:57 EDT 2004 | johnwnz
Look here: _a class=roll > href="http://www.aimsolder.com/techarticles/tech%2 > 0sheet%20BGA%20voiding-%20reducing%20through%20pro > cess%20optimization.pdf" > target="_blank"_http://www.aimsolder.com/techartic > les/tech%20sheet%20BGA%20voidin
