Electronics Forum | Wed Sep 20 16:24:19 EDT 2006 | bobpan
Larry, I would suggest not changing mod-codes on a machine that you dont know very well and that should solve the damaged z-rod problem. What you should do is get someone into your company to train you on the basic's of operating the machine. The $22
Electronics Forum | Fri Feb 16 09:16:19 EST 2007 | John S.
We conducted a DOE to establish our print setup parameters. These will of course depend on the paste you select, and the thing just runs. The techs store the head in a ziplock bag when not in use. When they need to run, they just attach the head,
Electronics Forum | Wed Sep 19 04:14:55 EDT 2007 | simmcircuits
Hi, Please help on this problem with an MPM AP25 screen printer. Everytime we print the error Squeegee Pressure Not Set is prompted. Although we can still print by clicking on Next, it beats the purpose of having an automatic printing machine. Can s
Electronics Forum | Sun Nov 04 01:11:19 EST 2007 | daxman
If we're comparing a TP9 or a MY9 to anything FUJI, I think the IP3 has it beat by a long shot. You can get a used IP3 with an MTU for under 35k. The only downside is that you require a programming interface with Fuji and it's built into the MyData.
Electronics Forum | Thu Dec 20 10:15:09 EST 2007 | slthomas
Wow, Chunks, condescension becomes you. Not. I think that in this forum when someone mentions *stencil* printing and doesn't specify what material, we tend to gravitate towards a scenario that involves printing solder paste first, then adhesive. If
Electronics Forum | Tue Jun 02 22:32:09 EDT 2009 | mikehe
I can tell you from current experience that the Sony and Assembleon machines are bullet proof. I just placed 0201's on the Sony G200 and ran it at wide open throttle and it didn't skip a beat. You have to keep in mind that the speed ratings that the
Electronics Forum | Fri Jul 22 10:03:15 EDT 2011 | scottp
Rain-X is a "hydrophobic silicone polymer" according to Wikipedia. Silicone is not something I want around a soldering operation without a chemist I trust telling me it's OK. Having it work a few times without any obvious problems wouldn't be evide
Electronics Forum | Fri Sep 14 01:48:37 EDT 2012 | dman97
Does anyone have a Fuji CP7 maintenance manual and a Fuji CP feeder calibration manual that they would like to share? We recently got a CP7 machine that is a little bit beat up and need to do some preventive maintenance to it. This machine is not as
Electronics Forum | Wed May 18 13:11:08 EDT 2016 | skyler0121
SMT, I currently work with both 2D and 3D AOI machines. 3D does give you the added benefit of Height on components which does help cut down on some of the over rejects. However, it does still have trouble with some of the same things as the 2D system
Electronics Forum | Wed Mar 21 13:39:11 EDT 2018 | tombstonesmt
I know this isn't a choice from what I'm reading, but we use to kill LED boards with an old Panasonic MSR. Our newer CM-602 and NPM could not beat the speed when you're talking about a max of 3 different part numbers; depending on binning. My .02 .