Electronics Forum | Fri Jan 15 11:25:29 EST 1999 | E. R.
Does anyone have information pertaining to re-balling BGA components using balls that are preformed onto disolable paper waffers (mini BGA reballing kit)? The paper containing the specific BGA device/pattern would be placed onto the BGA then process
Electronics Forum | Fri Jan 15 14:49:32 EST 1999 | Dave F
| Does anyone have information pertaining to re-balling BGA components using balls that are preformed onto disolable paper waffers (mini BGA reballing kit)? The paper containing the specific BGA device/pattern would be placed onto the BGA then proce
Electronics Forum | Wed Jun 30 18:36:21 EDT 1999 | Mark
| Does anyone have information pertaining to re-balling BGA components using balls that are preformed onto disolable paper waffers (mini BGA reballing kit)? The paper containing the specific BGA device/pattern would be placed onto the BGA then proce
Electronics Forum | Thu Dec 07 00:55:51 EST 2006 | billylim
As you are aware the common method to rework BGA is : 1. Remove BGA with hot air reflow machine ( SRT as current practice) 2. Clean the BGA pad using solder iron and solder wick. 3. Replace BGA with SRT rework machine. The problem we have with
Electronics Forum | Mon Nov 17 09:47:25 EST 2008 | cisridn
I would not recommend doing BGA soldering with only a hot air gun. I have done it in the past, but the boards would eventually come back from the field because the solder joints did not form correctly and the BGA would have to be reworked again. I
Electronics Forum | Wed Jul 03 10:37:41 EDT 2013 | sara_pcb
My circuit board contains 11 x 11 matrix 1mm pitch BGA, The device was tested in socket on evaluation Board. We handed over the actual PCB & devices for re-flow. The assembly house first re-flowed all the SMT components other than BGA. BGA was placed
Electronics Forum | Wed Jun 27 21:05:48 EDT 2001 | davef
BGA Cycle 1: solder ball attach. BGA Cycle 2: BGA attach to board. BGA Cycle 3: BGA removal from board. BGA Cycle 4: BGA pad dress. BGA Cycle 5: BGA ball replacement. BGA Cycle 6: BGA re-attach to board. Board Cycle 1: BGA attach to board. Boar
Electronics Forum | Mon Aug 21 20:20:18 EDT 2000 | Dave F
Hi CJ: I guarantee you that the portions of you BGA that will physically move the most as a result of changing temperature are the corners. For this very reason, many BGA have BT substrates that have a tg of 210�C. I would demonstrate the potentia
Electronics Forum | Fri May 04 18:27:34 EDT 2001 | chpark
BGA warpage combined with PCB warpage can lead significant process yield loss. First, it is possible that major portion of BGA's apparent warpage is, in fact, coming from the PCB warpage. Assuming that the warpage is solely from BGA itself, I think
Electronics Forum | Wed Oct 20 19:36:45 EDT 1999 | Dennis O'Donnell
Hi Mark: Running a wire under a BGA is possible, however if you plan to mount the BGA over the wire you would want to make sure that the wire insulation will withstand the heat of the reflow temperature. A more reliable way would be to lay a trace