Electronics Forum | Fri Sep 21 14:35:48 EDT 2012 | ekki511
HI all togehter we are looking now for a YAMAHY board for our Eclips . We found a bad board : KG2-M5840-512 this is the AS board assy a AC/DC servo board Can anybody help us to find one ? Thanks in advance Ekkehart
Electronics Forum | Sun Nov 10 09:58:38 EST 2013 | kumuda
We have been using a circuit board in the assembly of HV Tank used in X-ray generator. This board acts as a sealant to the oil tank opening. The top side area of the board which comes in contact with oil is conformal coated to avoid oil leak. However
Electronics Forum | Fri Dec 20 06:21:10 EST 2013 | bandjwet
When you need a few board modifications made such as cutting some traces or adding pads/traces and you do not have time for a board spin or have lots of pricey boards with mistakes what resource are you using? Internal or external? What method is bei
Electronics Forum | Fri Jan 08 16:08:38 EST 2016 | hegemon
That might be tough. Board houses typically stick to boards. You might find a board house that already works with a vendor that can supply Powder coated heatsinks, and the Board House might integrate for you, but it doesn't sound like one stop sh
Electronics Forum | Fri Nov 10 04:53:52 EST 2017 | vinitverma
Normally when you just rotate one of the boards (circuit) by 180 deg, you'll find all the placements shifted by complete board length in X direction. This is because the board is rotated 180 deg with the board origin as the pivot. So you'll need to a
Electronics Forum | Mon Sep 30 09:40:57 EDT 2019 | proceng1
One thought. Since this machine uses the camera as the board sensor, I've had a metal board support right where the camera sets up to detect the incoming board. Try loading the board after removing all the board supports. If it loads, then try som
Electronics Forum | Tue Oct 15 16:48:04 EDT 2019 | davef
I assume you're playing us, but I've always been a tool. So, here are a couple of links that will help you get started in understanding "printed circuit boards: + Printed circuit board [https://en.wikipedia.org/wiki/Printed_circuit_board] + Printed
Electronics Forum | Mon Sep 14 22:59:42 EDT 2020 | kylet
Looking to power up this board with 3v coin battery. I've tested this board with it and it works but to solder this on or make something that has clips for the attachment to power this up. Positive and negative connections are the circles on the inne
Electronics Forum | Wed Aug 03 07:29:03 EDT 2022 | pradeep14
Hi, We are facing the issue with Component orientation(Wrong orientation), during Proto build/NPI time in SMT for 1st board placement. We are not doing 1st board with STICKY board, directly placing the components with Paste board only. Pls suggest, H
Electronics Forum | Wed Oct 26 15:06:51 EDT 2022 | singert1980
Hello all! We are trying to program a new board on our machine, but keep getting an error of 'Board did not reach stopper'. The board is reaching the stopper, sensors are seeing the board, I'm lost as to what it could be. Loaded up a similar board a