Electronics Forum | Mon Aug 20 08:16:10 EDT 2001 | Stefan W.
Hi Dave, for several reasons the machine computer(s) should be connected to the LAN. 1. The machine computer can be as old as a 486 with a couple of hundred Mb hard drive and the more programs you store in there, the slower it gets. 2. If you put al
Electronics Forum | Thu Feb 05 14:33:32 EST 2004 | paul_bmc
I am in the process of programming my first PCB on the CS-400E machine and am having problems. I am too impatient to wait for the manuals on order so I thought I might see if someone out there might have some suggestions. I have done some research o
Electronics Forum | Fri Feb 19 09:20:01 EST 1999 | Stefan Witte
If the fiducials are rejected from the vision system, I would not relay on the accuracy of the position. Again, I would like to point out that the circle shape has a somewhat sinoid contrast in X- and Y- direction ( same as a diamond shape, but recta
Electronics Forum | Wed Aug 16 21:48:24 EDT 2023 | dwl
Its been a long time and the brain is foggy but if I remember the F1 and B3 use the same software and are very similar other then the B3 is a benchtop and the F1 is in line. Camera resolution and the number of cameras are the things that might be dif
Electronics Forum | Fri Dec 05 08:30:55 EST 2003 | pjc
If your operation is hi-mix low-volume, consider taking a look at some of the bench-top units out there. They are lower cost but can give similar performance as higher cost in-line systems. Some of the bench-tops cannot do solder fillet inspections t
Electronics Forum | Sat Sep 06 07:20:37 EDT 2014 | gascon5383
I have an issue with this DEK printer our company has been having for over a year now. It seems that DEK can’t narrow down what the issue actually is as well. The printer is a DEK Horizon 03i 09 SP13 P02. We are having an issue with the camera.
Electronics Forum | Fri Aug 28 11:39:23 EDT 2015 | dlee87
I have an issue with this DEK printer our company > has been having for over a year now. It seems > that DEK can’t narrow down what the issue > actually is as well. The printer is a DEK Horizon > 03i 09 SP13 P02. We are having an issue with
Electronics Forum | Thu Jun 01 16:46:40 EDT 2023 | assuredtech
We have the following Samsung CP20 spare parts and feeders available, we also have CP40 - CP45 spare parts and feeders available - please inquire. 1.) Fine Suntronix MRK OR4-H Power Supply 24V 16 Amp Output 2.) Y Axis Service AmplifierSanyo Denki PY0
Electronics Forum | Thu Sep 02 11:44:37 EDT 2010 | swag
No, red light should be what you see from a PEC.
Electronics Forum | Mon Mar 29 12:10:14 EDT 2010 | rway
Test Jet will work for catching lifted leads, certainly. X-ray is the only thing for testing for internal solder defects such as voids and cracks. I personally do not have any experience using X-ray, so I cannot advise on its reliability. Perhaps