Electronics Forum | Fri Feb 18 15:27:38 EST 2005 | jluckenbaugh
Frank R, I believe the Dymax #984-LVUF is a POLYURETHANE RESIN. I have used Humiseal 1A27 and 1A33 for several years with great success. Both of these materials are High VOC materials. If your customer does not require these materials to be aproved
Electronics Forum | Thu Nov 23 23:59:25 EST 2000 | terry sun
Hello to all out there, We're considering CC process,and would like to know some defferences between SSC3 of Electrolube and Humiseal 1B73, yes,I know that SSC3 is silicone one,and Humiseal 1B73 is solvent based acrylic as well as other basic propert
Electronics Forum | Fri Sep 11 12:08:10 EDT 2015 | derrikf
I built one using an old Asymtek Automove. When all was said and done, it cost less than $400, including what was paid for the machine itself. It's a very basic setup, (air over syringe), but for our needs it does everything and more. With air to syr
Electronics Forum | Thu Aug 27 11:35:07 EDT 2009 | davef
There are many possibilities: * Conformal coat is incompatible with surface residue on the board * Conformal coat is incompatible with solder mask on the board * Moisture is out-gassing from the board * Conformal coat is too thick and does not allow
Electronics Forum | Fri Feb 20 18:18:37 EST 2004 | davef
Pls email yer pix
Electronics Forum | Tue Sep 20 05:21:41 EDT 2016 | abhilash4788
Hi, Currently we are facing bubble formation in conformal coatings in the pcba. Have varied various specs of the conformal coating machine, even during manual application also having the same issue. the material used is silicone conformal coating. N
Electronics Forum | Sun Sep 04 13:16:44 EDT 2016 | danhhunter
Is it possible and does any standard cover inspecting soldering joints through conformal coating?
Electronics Forum | Tue Sep 20 09:07:23 EDT 2016 | davef
5 Common Causes of Bubbles in Conformal Coating (and Their Remedies)[Diamond-MT's Blog]
Electronics Forum | Wed Dec 09 08:45:31 EST 2009 | orlando
Does anybody run conformal coating process using UV cure varnish? We have a long experience on solvented urethane coating material but switching to solventless is unknown for us. Could you recommand vendors for UV curing oven? Thanks
Electronics Forum | Mon Jul 02 03:55:07 EDT 2012 | mccabekev
We are having a problem with inspection markings on our boards running when conformal coating is applied We have tried standard permanant markers, and also paint markers, but both run when the coating is applied. There must be someone out there who