Electronics Forum | Thu Oct 05 21:14:08 EDT 2006 | chrisgriffin
I'm with Chunks on this. In my experience MPM's are very accurate and reliable. There are so many out there because people like them. You can make a program with 2D inspection in about 10 minutes. Things do sometimes break on the 3000's, but not
Electronics Forum | Tue Dec 16 04:20:51 EST 2003 | ex maintain leader
Hi Cesar, I' think is not soo critical, but take cre my 5Y experiences are focused mostly bad designed pcb's on outrunning project wich are transfered to eastern europe or to mini factories in austria. at wery old dek265 I see 45 degrees squeegue
Electronics Forum | Mon Feb 26 12:10:24 EST 2007 | JCB
As you are running Left to Right it is the trailing edge of the board leaving the board at left opto that tells the board stop to lower (not the sensor under the camera - that just confirms the board has arrived at the board stop). How big is the boa
Electronics Forum | Sun Mar 07 08:02:40 EST 1999 | Earl Moon
| My printer evaluation has come down to the Fuji GP-6 or the Dek 265LT. I'm looking for experienced opinions on both of these options, we're currently running an older vintage Dek 265 printer that gives us constant electronic system problems. The v
Electronics Forum | Fri Sep 26 12:16:52 EDT 2008 | bickt
you cannot swap 0-3 only 0-1 or 2-3 they are not the same euro cards. they function very diffrently. if you look you will see there are more chips and circuitry on one set. there are 2 w/red leds and 2 with green leds. at least thats how they soo
Electronics Forum | Fri Mar 26 23:07:07 EDT 2010 | dekhead
Just a guess: Are you printing your fiducials on the fiducial side of the board? Fidicial Side is for Vision Calibration, Bare Copper Side is for Offset Calibration (Step 5 of procedure says "copper side uppermost"). After printing 25 fiducials o
Electronics Forum | Mon Sep 20 13:05:05 EDT 2010 | dman97
Hi, Yes I tried to do that. When I stick a key inside the slot, I still get a system suspended error. Although I can press the system switch and I can hear the locks engage, but nothing happens. the machine still thinks the covers are opened and
Electronics Forum | Mon Sep 20 14:47:59 EDT 2010 | dman97
DEKHEAD, Thanks for the repies. I have checked and re checked both cover switches, and both are making contact. I have even stuck bypass keys into both slots and still i get nothing. When you say it is an IO error, how would I go about checking t
Electronics Forum | Wed Apr 17 23:00:11 EDT 2002 | lysik
A DEK 265 Mark 1 is an old system. That does not mean that it does not work well. It is a very good system. It has however past it's 7 year support life. As far as a person that works for a OEM working on your machine there is no law that says he or
Electronics Forum | Wed Jul 28 12:29:58 EDT 1999 | Jennifer
| Yeh Dan, | Bought one of those DEK/Universal 265's awhile back. Swear it went faster with their name on it. Never done AMI. What's it all about? | Earl Moon Hello Earl! I have spoken to AMI a couple times while trying to do some research on pri
