Electronics Forum | Fri Jul 30 17:17:08 EDT 2004 | cvega
GPD Global provides a line of system to for small volume solder paste and condutive adhesive dispensing know as the MicroMax. Our systems have an accuracy of 0.001" at the needle tip, capability of two valve mountings, integrated closed loop needle
Electronics Forum | Sun Aug 01 21:17:52 EDT 2004 | Eric
I have already been working with GPD regarding this project but at the same time the stage of the project is still on the selection process so I'm still open to other machines to be qualified. As per current machine in house (Micromax II), we have
Electronics Forum | Wed Jul 28 11:47:16 EDT 2004 | GCronin
I am looking for a consistent method of applying no clean liquid flux to solder pads. My main concern is if I use a standard air-over type dispenser mounted to an automated arm that the liquid flux will make a mess and not be consistent. I'm not to
Electronics Forum | Thu Jun 14 01:47:23 EDT 2007 | pavel_murtishev
Good morning, Glue printing and glue dispensing processes have their pros and cons. Speed is main glue printing process �pro�. A-n-y dispenser will be slower if you replace your DEK with it. Your placement machines do not wait, right? So I wonder wh
Electronics Forum | Fri May 09 15:16:42 EDT 2008 | toddl
I thank everyone for their input, I have ordered a few missing parts and will try the auto dispense feature. I believe our production floor humidity is properly controlled so hopefully no problems in that area. I do have concerns with the dispenser s
Electronics Forum | Tue Nov 04 04:00:38 EST 2008 | Martin
Hi All, Anybody knows good, repetable method of dispensing flux for micro BGA rework? 6x6 mm(0.5 mm pitch) The flux dispensing amount by brush may vary depending on operator etc. If operator dispense too much flux the BGA "swim".Around the BGA compon
Electronics Forum | Tue Jun 15 19:14:51 EDT 2010 | hegemon
You also need to consider the total metal load in your dispensable paste. You'll need a slightly higher flux content and less metal, say around 87% total metal, in a 4 or 5 mesh size. We had to have some special mixes made in order to do fine pitch
Electronics Forum | Tue Nov 16 02:24:54 EST 2010 | mpolito
Good morning everybody, My company is developing new product which requires dispensing technology. This product has 3 different materials – basic conformal coating, rtv material, supporting silicon. I am preparing an evaluation so I am interested in
Electronics Forum | Wed Mar 16 21:07:50 EDT 2011 | jacki
Hi pls let me know if someone is using dispensing machine to apply solder paste for PTH components. I am facing the test , applying the sufficient amount of sodler paste into 0.4mm pitch holes. in the other hands, pls advise me if you are working for
Electronics Forum | Tue Jan 31 12:19:29 EST 2017 | ttheis
We're looking to add conformal coating to some of our pcb's which range from 2x2" to around 6x6". I would like to use a coating material that is not nasty smelling requiring ventilation or filtration if possible. Are there conformal materials that ar
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
611 Hollingsworth Street
Grand Junction, CO USA
Phone: (970) 245-0408