Electronics Forum | Mon Aug 06 10:41:42 EDT 2001 | Stefan Witte
In order to program your board, you are not exposed to the operating system. If you want to "talk" to a Windows machine via LAN, you will have to install a communication software either on the Windows machine ( disc access ) or on the Linux machine
Electronics Forum | Thu Aug 09 15:16:20 EDT 2001 | Adam
Thank you Michael, yes we use a Fine Focus X-Ray machine, we also had some dummy connectors to play with, so we profiled the board until we reached a desirable profile. For placement we used a GSM machine, the only issue we ran into there is the par
Electronics Forum | Thu Aug 09 15:16:31 EDT 2001 | Adam
Thank you Michael, yes we use a Fine Focus X-Ray machine, we also had some dummy connectors to play with, so we profiled the board until we reached a desirable profile. For placement we used a GSM machine, the only issue we ran into there is the par
Electronics Forum | Fri Apr 12 17:10:41 EDT 2002 | davef
Consider: * Finding JEDEC [ http://www.eia.org/jedec/ ] publication that includes matrix trays is: �JEDEC Publication No.95 Registered and Standard Outlines for Solid State and Related Products�. * Contacting tray manufacturers [ie, Peak, Summit, Nep
Electronics Forum | Tue May 07 02:58:27 EDT 2002 | dwoon
Hi, We are looking for some measuring machines to evaluate the ability of a SMT placement machine to produce quality. We will mount some dummy components on a glass plate and then insert the assembly into the measuring system which can measure the
Electronics Forum | Tue May 07 09:36:38 EDT 2002 | jax
Daniel, If you just plan on mounting chip components don't worry about getting an accurate measurement. The parts will vary in size, corrupting your accuracy measurements. If you are going to place leaded components you can probably get awa
Electronics Forum | Fri Jul 12 11:15:00 EDT 2002 | soupatech
I did the search for "lizard" and found a few references but..... WHAT IS IT? I will look into getting some dummy tape and reel BGA's. I just took over this dept. and I am still trying to get an inventory of what size and type feeders we have. It d
Electronics Forum | Tue Oct 29 15:25:12 EST 2002 | russ
Thanks for the info, I have previously not used the Ps and Qs so to speak and I am finding now that we are running into trouble mostly due to component height and body sizes. So for example we currently have "16 pin SOP" what we need is "16 pin SOP,
Electronics Forum | fastek |
Tue Jun 17 10:42:51 EDT 2003
Electronics Forum | Thu Aug 25 09:56:08 EDT 2005 | james
I ran a profile on a dummy board with no parts and the peak temp is 220. The 220 is just the temperature of the board of course. With that BGA on it, I am pretty sure it sucks up alot of the heat. Also I am looking at the profile and notice that i