Electronics Forum | Tue Mar 25 05:35:58 EDT 2008 | fujillews
Hi We have large stocks of New Fuji Spare parts for all types CP2-7,IP1-3,QP1-3, XP & NXT. We have the parts you are looking for. see Alternativesmt.com for information or contact me on Llew@alternativesmt.com
Electronics Forum | Tue Jul 22 19:45:27 EDT 2008 | crashoveride
0402 on CP643 is not that good.... We use the Fuji NXT for this part. However, nozzle configuration can be edited thru machine configuration, nozzle set- up.
Electronics Forum | Wed Jul 30 10:59:09 EDT 2008 | edmaya33
try Omni-excel 10 from Electovert ( Speedline Technologies ). Has a dual track option designed for modular mounters such as Fuji NXT,XPF, and Siemens.
Electronics Forum | Tue Jun 02 21:13:08 EDT 2009 | kircchoffs
thanks for the inputs. we are planning to run on fuji nxt i think cycle time will not be an issue. i still have another question if we can still use the same reflow profile for paste? or do we need to create another profile?
Electronics Forum | Wed Oct 20 11:39:01 EDT 2010 | mikesewell
On our Fuji NXT and AIM machines I never program local fids...we place down to 16 mil fine pitch and BGA, uBGA, multirow QFNs with no placement issues. Most boards are panelized in an array and we have corner fids added to the rails. Regards, Mi
Electronics Forum | Sat May 28 16:14:04 EDT 2011 | kiss
FOV - Feeder Offline Verification. Kit is generally used with FujiTrax for verification, however it can be used to power up the entire feeder pallet while it sits on the pallet change unit of the M3 or M6.
Electronics Forum | Wed May 20 11:13:45 EDT 2015 | josealatorre
1. DEK 710 for Screen Printing 2. Fuji NXT for Pick and Place 3. Vitronics XPM3i Oven
Electronics Forum | Fri Sep 01 19:54:31 EDT 2017 | tmennink
What was the outcome OrHorti after baking some? In the end we went with a different machine (Fuji NXT) which was able to get the leds out of the reel. After switching we still face a loss of about 0.5% but it is acceptable for now.
Electronics Forum | Tue Apr 10 11:40:52 EDT 2018 | assuredtech
Are you using Flexa? If so what REV are you using? Needs to be 6.XXX Ed
Electronics Forum | Wed Jun 19 15:43:38 EDT 2019 | jeremy1
Hello, can some help me, i have an NXT offline camera station to take pictures from parts.How can i import these pictures into flexa to edit the leads based on the picture?