Electronics Forum | Mon Sep 22 11:26:19 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can > repair the Green firewire camera (Cyberoptics) > off the Dek printers. I had 2 go bad and would > like to get them fixed if possible so I would > have backups. > > Thanks in Advance I can repair
Electronics Forum | Tue Nov 25 10:00:27 EST 2008 | wavemasterlarry
I use a alcohol rag and compressed air to blow out them via holes. I think washing is over rated. A simple wipe is all you need. Plus it keeps the planet green which is what everyone seems to be squacking about these days. Thats why I wash one a
Electronics Forum | Mon Jan 18 11:39:14 EST 2010 | tech1
Actually the color represents the amount of cover tape that is exposed or peeled over. 01005 - 0402 Green 0402 - 0805 White 0603- 1206 Yellow 0805 - on up Red We use the Green feeders for 01005 placement, they made a later rev that has a magnet in i
Electronics Forum | Thu Feb 14 17:00:42 EST 2013 | richardc
I am trying to use Mydata TM8C feeders that work fine on a TP93 running 1.6.18 TPsys but are not recognized by a TP94 machine running 1.4.7 TPsys. I get a green flashing light instead of a solid green. I can initialize the hardware but can not proc
Electronics Forum | Wed Oct 02 00:35:33 EDT 2013 | sonavc
thanks I tested the conveyor A or B , when it is on the motor turn and the green LED at the out put card is also light on. But when i turn on the X y table motor , the green LED is on , but the motor is not run. I will try to replace the I/O
Electronics Forum | Tue May 28 12:56:22 EDT 2019 | dekhead
It is a communications failure between the CPU and the Cognex card. Does comms initiate between the 2 cards (flashing green on both)? or does it immediately come up red LED on Cognex? Have you reseated the CPU board as well as the Cognex? Is this a s
Electronics Forum | Sun Sep 11 01:25:34 EDT 2005 | Mika
I agree with prior postings, but there is no perfect yes/no answers, right (left)...? Only good questions to be answered. I think it is overkill to have an extra stencil, why do you need it? (That is if you have a proper stencil cleaning equipment).
Electronics Forum | Tue Jan 13 12:54:11 EST 2009 | boardhouse
Emil, Part of the problem it sounded like is that the color was not clearly defined as light or dark in Matte or gloss. Your example of car paint would have the same issue if you just ask them to paint your car green. What color of green would y
Electronics Forum | Sat Jun 17 09:09:15 EDT 2000 | Chrys Shea
Contact the adhesive manufacturer, or their website. Most adhesive suppliers offer two cure options - one with a belt oven profile and one with a box oven profile. The belt oven is usually a ramp and plateau of 120-150C for approx 2 minutes. The b
Electronics Forum | Wed Mar 12 13:59:54 EDT 2008 | carsan
I am looking for some feedback on the Seica Firefly Laser Soldering System. We saw a demo and were somewhat impressed but would like to hear from anyone that has any practical experience using one. Specifically, we noticed that you have to select t
.gif)
