Electronics Forum | Fri Jul 18 16:02:25 EDT 2008 | wrongway
I think Real Chunks has your answer home plat or reverse home plate or like we use a 10% reduction on most aptures vs pad I think your problem is to much paste on the pads we used to see a lot of that with 8mil stencil thicknes on our 1206 caps went
Electronics Forum | Wed May 19 15:42:46 EDT 2010 | davef
Hear ya. Mostly, we production people. So, we shy away from home brew soldering techniques, unless we get ourselves in a mess. That being said, there's a fair amount of stuff on the web about home brew BGA and fine pitch QFP soldering. Here's an
Electronics Forum | Wed Mar 13 17:17:42 EDT 2013 | isd_jwendell
I don't know your machine, but on mine the interlock is the large access door. It's done so that you cannot open the cover while running, but it also checks for a closed door at startup due to head homing sequence. Yours may be similar in that it won
Electronics Forum | Fri Aug 30 10:50:47 EDT 2013 | bobpan
Clear the memory again and try to input by handheld the modcodes 1 by 1 and see when the problem happens. You can input a number then press home and home. Sounds to me like a number is incorrect but its hard to tell. Are you sure the file that you ar
Electronics Forum | Mon Jun 12 11:04:20 EDT 2017 | bobpan
So what your telling me is kind of vague. Does the machine home and go to the front left corner of the machine? If it does....this could be a quad align problem....meaning dirt on the lens or so-forth. You should watch the heads homing in the z-axi
Electronics Forum | Sun Apr 17 18:22:18 EDT 2022 | dekhead
Please clarify what you mean by "bouncing". Small up and down motions around home position? Full stroke of table movement up and down? Or somewhere in between? Does it start as soon as servo power is applied? Or not until table home movement is initi
Electronics Forum | Wed Nov 04 12:01:28 EST 1998 | Michael Bryant @ SMTnet
Geez Jeff, your making me blush. Thanks a lot for the comments, it's nice to be appreciated. If you have any ideas on how we can make the home page or other parts of the site even better, please share them with us. Thanks again. | To the site bui
Electronics Forum | Wed Apr 15 19:21:46 EDT 1998 | D.Lange
| | Ben, | | I am a fan of sharing wherever it can be done! My only concern is when information sharing gets into commercialism. If it can be done without the commercials, I am all for it. | | Good luck. And I am on ICQ now if you need someone to hel
Electronics Forum | Thu Apr 16 12:25:50 EDT 1998 | Mike
This may be a dumb question but what the heck, What is an ICQ #? | | | Ben, | | | I am a fan of sharing wherever it can be done! My only concern is when information sharing gets into commercialism. If it can be done without the commercials, I am all
Electronics Forum | Tue Jun 05 14:36:55 EDT 2007 | stepheniii
No. It was CK who brought up AC at his home and erroneously said that having your AC on a lower setting used less power than having it turned off when you are not there. I'm saying with AC at home turn it off when you are not there and have it come