Electronics Forum | Fri May 06 07:58:33 EDT 2016 | cyber_wolf
Darby, I'm not completely sure I understand. Juki machines have what is referred to as a multi-head. The offsets between the heads are the same as the spacing between 8mm feeders. So the (6) heads all come down at once and "gang pick" from 6 8mm fee
Electronics Forum | Thu Dec 10 09:29:29 EST 2015 | tsvetan
Any major brand (Samsung, Juki, Panasonic, Fuji) will work, most important is what service and support you will get *after* you buy the new machine. Once the machine is set and run, the most annoying part is to have downtime waiting for support quest
Electronics Forum | Thu May 05 07:58:35 EDT 2016 | cyber_wolf
Not sure what you mean. 0201's and 0402's are both on 8mm feeders. Juki's will do simultaneous picks an all 8mm feeders no matter the component size. Your feeders need to be maintenanced and calibrated to reliably pick 0402's and 0201's. I hav
Electronics Forum | Tue Apr 02 13:43:54 EDT 2013 | ericrr
On one of the products uses a QFP (Quad Flat Package)which is not going on straight, maybe 20 pins per 4 sides. sometimes I have to tweak the alignment before the board goes in the oven, this practice can be a bit of a worry if you over tweak it - pa
Electronics Forum | Fri Aug 04 10:09:47 EDT 2017 | ks0707
Good morning, I looked one cycle of programming of Koh Young 3D AOI machine first, and will do same thing for JUKI Pick & Place and Mechatronic 2D AOI machine soon. BTW, I found from User manual of Koh Young 3D AOI that it allowed Mento Export file
Electronics Forum | Mon Feb 27 06:18:32 EST 2012 | sarason
I am just releasing Version 1.0.0.9 Beta Release Added feeder swapping. minor fix in Mydata TP Sys 2.7 Added more Juki 2000 and 700 series and Yamaha YP/YG machines, more Panasonic machines. Updated Options tab, User interface cleansing Added Check
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Wed Apr 28 20:57:22 EDT 2021 | stephendo
It will be tough to get a good line for that cost. You might want to start by looking at Mydata and Juki for the machines. Ekra for the screen printer and Heller for the oven is where you might want to start. If you have not already you might want
Electronics Forum | Thu May 12 00:18:55 EDT 2016 | darby
Sorry for delay - been flat out. Sr - I understand what you are saying. My concern is that combined with the head offsets and variations in pick points (i.e. having to teach feeder positions for very slight amounts like 0.05mm)then you cycle times wi
Electronics Forum | Fri Apr 30 10:42:40 EDT 2021 | oxygensmd
I have a customer who ask close to prototyping jobs with low volume and high-mix components. A regular job have around 5-30 pieces board but have high quantity and many type of components. All the time over 1000 pieces of parts on board from 250-350