Electronics Forum | Thu May 14 06:55:59 EDT 2009 | davef
While you're waiting for others to reply: * Search the fine SMTnet Archives to find threads like http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=28544 * Checkout Daan Terstegge's excellent jump site http://www.smtinfo.net/Db/_Ball%20Grid%2
Electronics Forum | Thu Nov 05 10:02:54 EST 2009 | swag
You can buy a couple of conveyors for loading and unloading machine or a real half aced way is to jump SMEMA cable pins with tweezers to get boards in and out. With that method, you could end up with one on the floor at some point with a smashed, de
Electronics Forum | Thu Jan 21 18:11:24 EST 2010 | colormaker
I have a strange problem with 1208 resistors flipping off placed position. I have the same reflow settings that I have used for years with the same solder paste. PAste is only a few months old and it was used just 1 week ago without problems. Some re
Electronics Forum | Fri Nov 05 10:33:18 EDT 2010 | methos1979
This thread will be dedicated as a place where Mirtec owners can discuss their programming tips, tricks and techniques. If you have any experience with these machines please post them here. If you have questions about specific issues with this syst
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Fri Jul 06 10:45:02 EDT 2012 | ashworth14
In relation to question 2 the vacume on them is quite sensitive so as long as you bring it down slowly the component is almost sucked up off the PCB so you don't have to actually press it down on the the component, and i have never experienced any so
Electronics Forum | Sat Nov 10 19:54:04 EST 2012 | kahrpr
Some people put spark gaps on the PCB it a trace that comes to a point that's exposed from the circuit you are trying to protect to a trace that comes to a point from the ground trace. The 2 points are about .005 inches apart. When the charge hits th
Electronics Forum | Thu Aug 08 19:20:08 EDT 2013 | hegemon
I too am hoping a NADCAP guy might jump in here. I would like to know how this portion of the question is handled. Evidence of PM, periodic cleaning of EQ and tools, no issues. Thermocouple calibration? You would think that evidence of Oven CAL
Electronics Forum | Thu Aug 14 02:49:24 EDT 2014 | eniac
Not all eX-feeders need a special procedure on the first connection to feeder base. It depends from firmware version. I received my new feeders two weeks ago - and they work from box without any special manuals like "hold the triangle button and jump
Electronics Forum | Mon Nov 30 12:29:17 EST 2015 | james1903
Are there any Siplace users out there that have any experience of the latest "smart feeders" for X series (version 3 I think, with built in handle and LED´s instead of LCD display) I am specifically interested to get input on any issues experienced w