Electronics Forum | Tue Dec 22 15:10:57 EST 2020 | ilavu
Tom, There are two power supply in the machine. One on top of VME box and other behind power distribution panel. The voltage that you see and check at PDP is not from VME.
Electronics Forum | Fri Jan 12 09:22:51 EST 2018 | dskling
Hello We have a Vitronics XPM820 that has us stumped. We have replaced both power supplies (G1 and G2) and we still cannot clear this alarm. The A1 board has all 4 leds light for proper voltages. We have verified that we are getting the correct vo
Electronics Forum | Tue May 30 10:17:07 EDT 2000 | g cronin
I thought I saw that there is a retro kit required to supply the proper power to the multi pitch feeders from older machines. Check the Universal web site for info on the multi pitch I think that is where I read about it...
Electronics Forum | Wed Mar 13 17:21:08 EST 2002 | rory@integraonline.com
14,000 uf now that's a BAC!!! Not really that big - check out www.cap-xx.com Cheers, Rory
Electronics Forum | Tue Oct 28 14:03:20 EST 2003 | Bill
Thanks for the help ---one of our test techs checked the power supply and it reportedly is good. Thanks again, Bill
Electronics Forum | Thu May 20 22:38:19 EDT 2004 | johnww
Hi Dilbert, Thanks for the reply and information. I forgot to mention I'll be using them with a 12V power supply. Thanks again. John
Electronics Forum | Thu May 20 16:14:55 EDT 2004 | jsk
UP AND RUNNING!!! Power supply is good but i found two loose wires in connector 12PL26 (DC to Y1). I think i may have another bad connection inside the Y1 enclosure. Monitor seems to be working OK. Thanks for your help, jsk
Electronics Forum | Sun Sep 18 20:42:37 EDT 2005 | Ken
Link Fail is the RS232 connection to the FCU. I would check the connector, cable that plugs into the computer. Verify all power supplies are working. The most likely scenario is this: Computer malfunction Cable / connector issue. Defecive FCU
Electronics Forum | Wed Oct 19 11:43:16 EDT 2005 | dougs
Ken is right about the BTU VIP's, we have 2 both about 6 years old as well, i've been here 1 1/2 years and only replaced a 15V power supply on one of them, no other issues at all.
Electronics Forum | Fri Apr 21 23:13:59 EDT 2006 | valuems
The snema connecters are located behind the front cover, and to the left of the small power supply. The connecters are up side down. The front one is the left side and the second one back id the right side. Left is normaly the upstream and the rig
.gif)
