Electronics Forum | Mon Jan 14 15:15:25 EST 2002 | burb1999
Currently our company is in the process of putting together a SMT prototype line... I have experience with fuji, universal, DEK, MPM, BTU, Electrovet in a high volume application. Now with prototype builds we have narrowed down a few and would like
Electronics Forum | Wed Jul 17 17:56:38 EDT 2019 | rgduval
Check the MOT board. You can usually swap out the individual MOT boards, and see if the problem moves. If it does, you can isolate which board has gone bad. You can also check the encoder on the conveyor, to make sure that is still working correct
Electronics Forum | Mon Jun 23 13:01:54 EDT 2008 | wschulz
Hey guys, My company is currently looking into developing a SMT line. I have an interesting perspective on this due to the fact that I worked a SMT line for quite a few years as an equipment operator. Now I am an engineer and at a different company
Electronics Forum | Mon Apr 09 10:16:14 EDT 2007 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. Fuji NP XL series allows 27 by 23 inch boards using a conveyor. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * HSP 4796A a
Electronics Forum | Fri Jan 04 09:42:58 EST 2002 | gdstanton
First let's hear from those fellow SMTNets use MyData Placement equipment. Sencond, anyone interested in sharing MyData based package type data? We just bought a MY-15 and have very little package data available. It would be cool if we could get
Electronics Forum | Thu Jun 14 00:10:18 EDT 2012 | tech1
Most of it depends upon the type of Y wagon you have. if they are internal conveyors you need to remove the covers from the operator side. There are 3 screws holding the Y wagon down, 2 of them are hex screws and the one in front is an allen head. W
Electronics Forum | Fri Nov 22 10:24:28 EST 2019 | rgduval
When you swapped the MOT card, did the proble move to another axis? I'm guessing no, but, wanted to clarify. If the problem did not move, you either have an x-motor problem, x-motor counter problem, or x-transducer problem as noted. Or, a cable pr
Electronics Forum | Sun Aug 15 20:03:14 EDT 2021 | tomdegas
How do I enable the tools on a MyData Hydra head. The machine is telling me that tools 1-5 are disabled. How can I enable them? Thanks Tom
Electronics Forum | Tue Apr 25 15:46:47 EDT 2006 | JEM
Trying to convince management to buy TPSys 2.4 software upgrade for MY-12 and My15 machine. Currently running 2.2 ver. Any mydata user's out there explain how my company would benefit jumping from ver 2.2 to ver 2.4. I think the cost is $1200 per m
Electronics Forum | Thu Jul 18 11:15:27 EDT 2002 | gdstanton
Folks, I'm working on setting up an automated process which captures data on SMT component dispensing during placement. Ultimately, I'm hoping to use it to account for component attrition (load/unload losses, vision/mechanical/electrical inspection
