Electronics Forum | Sun Sep 12 09:40:04 EDT 1999 | Wayne S.
hello having a problem with one customers bare boards not matching my stencil apertures. i design stencils based on gerber data and reduce up to 15% on some pads. do some board houses reduce pads after receiving gerber data???why would they do that
Electronics Forum | Wed Mar 27 19:26:53 EST 2002 | ianchan
After a whole night's self review, I think we can term the slant/tilt as "floating 0805, yet end-terminals have acceptable solder joint formation". the width portion of the 0805 RES/CAP is (floating)elevated from the PCB pad, yet both (width) termin
Electronics Forum | Thu Nov 01 13:08:33 EST 2001 | dave231
I am just starting to get into sub 50mil pitch, but from what I can see you are correct. But I can help with solder stencil. I cut the width only half of what the pad is, but the keep the length the same. This has helped but does not fix always. Stil
Electronics Forum | Wed May 29 19:00:08 EDT 2002 | russ
Have been seeing a pretty fair amount ourselfs. it seems to come and go. Couple of questions 1. Are the parts shifting to one side during reflow? 2. is it true non wetting to the component? I have been experimenting with different pad geometries a
Electronics Forum | Wed Sep 08 21:32:46 EDT 1999 | Jason Nipper
| | | | | | Hello: | | | | | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting
Electronics Forum | Sun Sep 12 10:51:04 EDT 1999 | K.T
| | | | | | | Hello: | | | | | | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before put
Electronics Forum | Wed Mar 17 19:41:15 EST 2004 | Dreamsniper
I'm hit with the above problem and found out that the BGA's themselves have fibres on their solder balls. I have soldered some without having the knowledge of the above fibres and found that the fibres are caught between the PCB pad and the BGA solde
Electronics Forum | Thu Sep 11 11:12:52 EDT 2008 | aj
Hi, I had similar problem a while back. Diagnosis was a combination of two things: 1 - Gold thickness was below spec. which gave us solderability problems. There should be other areas of the board that show signs of this. 2 - The devise in queast
Electronics Forum | Wed Sep 22 22:23:55 EDT 1999 | SY
| | | | | My stencil thickness is 6 mil and we got qfp's with fine pitch. | | | | | how many percent should i reduce my stencil aperture using a 6 mil stencil for 0.5 mm pitch and 0.4 mm pitch ? | | | | | | | | | | thanks | | | | | | | | | We use 6
Electronics Forum | Fri Feb 14 08:08:45 EST 2003 | Louis
First of all I would like to say that my English is so-so but I will try to help you. FOLLOW THOSE STEPS AND YOU WILL BE OK. 1-- select learn fiducial option then enter minimal value to fiducial width and height (enter 0 and you will g
