Electronics Forum | Mon Apr 18 11:45:04 EDT 2022 | dontfeedphils
If you're 100% certain you have the correct nozzle for this package you could check to see if your PnP machine has an option for "Auto Adjust Pickup Position" or something along those lines and try changing it (if it's currently on, try turning it of
Electronics Forum | Mon Apr 18 19:58:22 EDT 2022 | cbeneat
I had the same question. We have custom nozzles made by Count on Tools. I believe we found urethane works the best for the silicon domed LEDs. Have you slowed the feed rate down on the feeder? Also adjust the top tape to the back slot on the feeder.
Electronics Forum | Fri May 13 22:24:47 EDT 2022 | glasscake
Try adding blow after mount before head up if your machine lets you. Make sure your placing the part into the solder paste as that will add some holding force as well. If your tips are spring loaded you can do some 0.5mm additional mounting height.
Electronics Forum | Sat May 29 02:20:08 EDT 2010 | vinitverma
Mch Adjust > Adjust Target > Laser Unit > Nozzle Position. Here the laser will automatically detect the centre of the nozzle. Remember - It'll give you the option of using a component for the test but DON'T use any component. Let it detect the centre
Electronics Forum | Mon Feb 13 07:48:42 EST 2012 | pr
Try "Count on" Cree Led nozzles. http://www.smtnet.com/news/index.cfm?fuseaction=view_news≠ws_id=9466 We are getting ready to try them ourselves. Let us know how it goes. good luck, PR
Electronics Forum | Tue Sep 18 12:44:06 EDT 2012 | mark25y2001
handling CM202 all type and capable to mount 0201 component with using nozzle type 205...
Electronics Forum | Mon Aug 29 13:34:58 EDT 2016 | mhanrahan
We had this issue with our old MV 150. This was usually due to clogged/dirty or bent nozzles, or clogged dirty filters on the vacuum supply to the head.
Electronics Forum | Fri Feb 03 17:57:40 EST 2017 | sarason
Is it the weight of the component versus nozzle size and vacuum pressure? sarason
Electronics Forum | Mon Mar 12 19:23:35 EDT 2018 | ramsus
hello you can use the specific nozzles 161 or fix the pickup on axis y: 0.20mm.
Electronics Forum | Sat Jan 05 04:13:23 EST 2019 | bane016
actually not...only with NPM W2 AND TT2...and with HDP dispenser...CM602 402 is an older generation than NPM but the principle is the same..the program is slightly different...im more than 10yrs in this job..
