Electronics Forum | Mon Jun 12 07:52:21 EDT 2017 | tch
We have had this issue on our Delta 3 waves and determined that there are small pin holes in the solder pot. We had plates welded to the outside of our solder pot on the lead free wave and this bought us enough time until we could replace the wave, a
Electronics Forum | Thu Jul 21 13:56:48 EDT 2005 | russ
Thanks Dave, Now I am going to find out if I am consistent with the IPC.
Electronics Forum | Thu Jun 24 10:48:02 EDT 1999 | Earl Moon
| Recently, there has been an upsurge in the Pin Hole/Blow Hole problem in our wave soldering process. We are baking the PCBs for 2 Hrs. at 125 degree C. The Wave Soldering profile seems to be O.K. Still the problem is persistent. Can somebody hel
Electronics Forum | Sun May 08 07:09:04 EDT 2005 | Rick Iodice
We are continuing to struggle with voids under BGA's. Our problem are not consistent. some CCA's are perfect but others have pin hole sized voids. Does anyone have any feedback on Indium 92j and how it performs for bga's?
Electronics Forum | Mon Sep 26 16:48:32 EDT 2005 | PWH
Are you using masking? Conformal coat will de-wet (no pin holes usually, though) due to masking tape adjacent to affected areas if the tape glue chemistry isn't compatible with the conformal coat.
Electronics Forum | Wed Aug 18 16:09:54 EDT 2010 | rway
You can try using a PTH or a tooling pin hole. It's much more consistent than fiducials.
Electronics Forum | Thu Feb 01 12:22:26 EST 2018 | davef
When you talk about baking, I get the impression that you're talking about boards. Are you components dry also?
Electronics Forum | Fri Feb 02 02:05:49 EST 2018 | ameenullakhan
Hi Davef, Yes we have tried few component for cold baking for around 7 days around 50 to 60 deg C.
Electronics Forum | Fri Feb 09 18:54:49 EST 2018 | duchoang
Can you share the oven profile? For me it looks like the profile has fast ramp up and short TAL period. How many zones the oven have?
Electronics Forum | Tue Feb 13 05:11:58 EST 2018 | ameenullakhan
Hi, We are using 10+2 reflow oven ( BTU Pyramax 150 ). We have tried with short TAL ( RTS profile too ). As of Now we are using the attached profile, which has given us lot better results. But the issue is not eliminated. Thanks