Electronics Forum | Tue Apr 11 08:29:31 EDT 2006 | mapell
Hi Dougs I worked a bit a few years ago with a diode type soldering laser. I found laser soldering very application specific so make sure you send samples off to differnt companies to see actual results. You can get good results with a laser system
Electronics Forum | Mon Feb 02 15:25:44 EST 2009 | fishingfool
muarty, Each has their place. Rules based systems (algorithm) are harder to program and I have seen post on here with people saying there is no real difference in defect detection. Image based systems are much easier and intutitive to program.
Electronics Forum | Thu Dec 18 10:07:01 EST 2003 | James
Contact Systems are nice and easy to program and operate. I would recommend the 400 series as well
Electronics Forum | Fri Apr 02 14:11:21 EDT 2010 | bigdaddysoy9
Manjunath, I prefer orthogonal systems. In my experience they are actually better at detecting coplanarity and HIP defects than multi camera systems. They are obviously limited, in that they can not inspect a component under another component, b
Electronics Forum | Wed Nov 17 15:05:29 EST 1999 | Wade
I have had an Orbotech VT-8000 running in-line for almost a year and have been very pleased. The VT-8000 does everything the application engineers say it can do. The support and honesty provided by the Orbotech staff is outstanding. I talked to Vi
Electronics Forum | Fri Mar 24 22:03:23 EST 2006 | mika
Hi all, Is there anybody out there who have some experience of Valor Trilogy 5000 in respect of programming/line balancing SMT-lines consisting of Fuji CP6-4's and UIC-GSM's? Our company is seriously thinking about to go for UniCam and their solution
Electronics Forum | Fri Aug 08 07:27:43 EDT 2008 | lonta96
Hi, I'm from a semiconductor package assembly, and currently looking for an offline solder paste inspector capable of true volume measurement. Any recommendation for a machine that can measure paste volume on a leadframe (metal substrate)? I found
Electronics Forum | Fri May 30 09:18:41 EDT 2003 | swagner
MVT? When you feel your program is complete run a bare board through the system and please post the results of the inspection.
Electronics Forum | Fri Mar 01 03:57:10 EST 2013 | jlawson
Another software vendor that you might want to look at is mentor valor mss tools. System has good mydata support from full programing, grouping and even autogeneration of smt parts, materials management , manual assembly,documents, and many other sco
Electronics Forum | Fri Aug 03 07:23:09 EDT 2001 | davef
Why not use the same calibration tracking, recording, and problem resolution system that you use for other calibratable production equipment, like meters, scopes, and programable controllers? If you have a reasonable quality system, then the tools y