Electronics Forum | Tue Sep 26 10:44:28 EDT 2006 | Brad Courtemanche
Hi larry, don't know if you resolved your problem but if machine is picking part three times, rejecting all three but places number fourth your nozzle pickup is misaligned very slightly. During the first three pickups the nozzle is finally seating it
Electronics Forum | Tue Sep 26 11:05:44 EDT 2006 | slthomas
You might also have a dirty/sticky Z-rod resulting in the same problem, although ordinarily you'll see a lot of missed pickups as well.
Electronics Forum | Tue Sep 26 15:09:17 EDT 2006 | slthomas
I hope that you don't miss that data later on. My suggestion of changing align type to "2" (in the extent data) eliminates the alignment step but leaves the data intact.
Electronics Forum | Wed Sep 27 17:21:36 EDT 2006 | slthomas
You'd be surprised what you can overcome with some smarts, some mechanical aptitude, and daily medication.
Electronics Forum | Mon Sep 25 09:42:51 EDT 2006 | slthomas
It sounds like it's just failing the laser align step. Try changing the align type for the part to "2" and see if it places it. If it's failing the laser align and you have valid part dimensions I can't help much but you might consider opening up th
Electronics Forum | Fri Sep 22 15:35:14 EDT 2006 | lheiss
Hello all, Finally ready to run my first 14 up array and the machine picks up the part moves to the placement location, them moves to home and drops the part. The Z axis never moves. I do get a "run error 1" at about the 4th placement (if it was a
Electronics Forum | Tue Sep 26 11:58:56 EDT 2006 | lheiss
Thanks for the responses everyone. It seems that the main problem was that the extent data wasn't set up right in Central Controller. I deleted it from the Pickup and Place files and it started placing things without correction. I only had about 1
Electronics Forum | Mon Oct 02 16:38:20 EDT 2006 | lheiss
Brad, Thanks for the info. Now that I have my align data set correctly I'm having this problem. I've greased and realigned until I'm blue in the face. If I do a nozzle change then a function 30, press the nozzle on with my finger and do a functio
Electronics Forum | Mon Jun 05 14:59:36 EDT 2000 | Mike Naddra
Does anyone have any expierence placing BGA's or Micro BGA'a with a Quad 4C, Any information will be helpful. Mike
Electronics Forum | Mon Mar 11 13:36:28 EDT 2013 | babe7362000
To get rid of the old info as far as the electrical test and so forth, just try to type in the pick number in CC, it should erase that extra info that you do not need. Do this after you uploaded your information. Hope this helps.
