Electronics Forum | Mon Jul 22 14:06:16 EDT 2013 | bobpan
I dont have a machine to look at but its one of 2 ways.... 1. It finds a home sensor then counts out to a position. 2. It finds an etched mark on the glass scale then counts out to a position from there. I know the Q-series machines does the second
Electronics Forum | Fri Aug 16 03:44:12 EDT 2013 | rollon65
Hi. Sorry I don't have an answer for this but I have the same problem in the "Y" axis on one of my 4Cs after the machine has run for around 4 hours. The machine seems to partially correct for the pick-ups being off as the placements are fairly good
Electronics Forum | Wed Jun 19 10:11:59 EDT 2019 | jamesn
Hi to everyone I hope someone can help me with a problem I have on a Quad QSP-2. when calibrating ( Or trying to use ) Feeder Bases 2 and 4 on gantry 2 Im getting small amounts of accumulative drift in the X axis. I have changed the servo amplifier
Electronics Forum | Wed Mar 31 10:08:13 EDT 2010 | leemeyer
First I would only be concerned about the front panel led's if the transport is not clamping. These LED's are most likeley burnt out. If the transport clamps your sensors are working properly. If you are seeing a "Place 1 Z" on the handheld it is ask
Electronics Forum | Mon Feb 11 14:40:39 EST 2013 | marcelorotofrance
Well, actually both the feeders and the machine were bought "as is", so these are not in their better shape. Even more, the feeders are not the machine's originals and don't match each other ; "Un paisano de cada pueblo", as we say here. Some units
Electronics Forum | Tue May 07 13:32:15 EDT 2013 | bobpan
Sounds like you may have a z-axis problem. I would check the axis out and run the z rod up and down by hand to see if there is a problem....sticking,sensor/flag broken....etc. Maybe you can unplug the z-axis card and then turn the machine on to see i
Electronics Forum | Tue Sep 27 11:43:32 EDT 2016 | tnisbet
Yes you can open the tolerance, and that’ll usually work for a bit. Is the LAE is linked to multiple parts? If so, then the easiest thing is to open the tolerance. If not, that’ll require another route to try. Is it happening to all of the components
Electronics Forum | Mon Mar 08 11:46:38 EST 1999 | Wendy Casker
| Hello; | | I am looking for general info on backplane assemblies. Any info would be appreciated, but some of the questions that come to mind include: | | -What part types other than connectors do backplane cards have on them? SMT? Leaded? Qua
Electronics Forum | Wed Jun 01 11:02:57 EDT 2016 | claudea2
I have 3 used Quad 4Cs and the nozzle changer on one machine never worked. I decided to troubleshoot it this week. I repaired the changer by changing a defective optical sensor but I still get error 17 when I try a run-step nozzle 1, 2 or 3. Error 17
Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723